[Wed May 23 10:18:13 2012] Detection parameters:
  Position = (171.8, 288.0) = 2 17 13.92 -73 59 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.2 +/- 22.2
  Background counts = 5.4
  Rate = 0.04 +/- 0.003

[Wed May 23 10:18:13 2012] Off-axis axis estimate = 9.21'
[Wed May 23 11:43:36 2012] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Wed May 23 11:43:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 11:43:36 2012] Initial guess for spatial extent in simple fitting = 11.03"
[Wed May 23 11:43:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Wed May 23 11:43:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.03"
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 23 12:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src1.csv
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 23 12:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src1.csv
[Wed May 23 12:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 23 12:17:44 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 23 12:18:01 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.471655 pixels away
[Wed May 23 12:18:01 2012] Vigneting correction estimate = 1.000000
[Wed May 23 12:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 12:18:01 2012] Assessing source extent using major
[Wed May 23 12:18:01 2012] Source does appear to be extended
[Wed May 23 12:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:31:51 2012] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Wed May 23 13:31:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 13:31:51 2012] Initial guess for spatial extent in simple fitting = 11.03"
[Wed May 23 13:31:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Wed May 23 13:31:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.03"
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src1.csv
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src1.csv
[Wed May 23 14:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 23 14:01:26 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 23 14:01:42 2012] Spatial fit model total counts = 333.331000, observed total counts = 333.000000
[Wed May 23 14:01:42 2012] Offset between fit and detection position for source 10 = 0.170222 pixels
[Wed May 23 14:01:42 2012] 334.962700 total counts/ 89.676700 bgd. counts: snr = 25.901979
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.170222 pixels
  Position = (172.0, 288.1) = 2 17 13.76 -73 59 47.0
  Extent = 6.5 (6.0-7.2)", rotation angle = 0
  Source counts = 245.3 +/- 18.3
  Background counts = 89.7
  Rate = 0.02 +/- 0.002
[Wed May 23 14:01:42 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:01:42 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:01:42 2012] Source does appear to be extended
[Wed May 23 14:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:41:16 2012] XMMSAS src. selection expression = ellipse(14912.009800, 25016.327600, 392.740811, 392.740811, 0.000000, X, Y)
[Wed May 23 14:41:16 2012] Writing source region out to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10_src.reg
[Wed May 23 14:41:16 2012] Extracting stamp from image fullrun_mos2_xmm0099840101_pi300-10000_cl_sm2.00.img.gz, (149, 266) - (195, 311)
[Wed May 23 14:41:16 2012] XMMSAS bgd. selection expression = annulus(14912.009800, 25016.327600, 654.568019, 1309.136038, X, Y) && !ellipse(15199.124000, 23395.722200, 446.989613, 446.989613, 0.000000, X, Y)
[Wed May 23 14:41:16 2012] Writing fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10.gif
[Wed May 23 14:41:19 2012] Mean detx,y = (-8475.57, 3708.33) 
[Wed May 23 14:41:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:41:36 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:41:36 2012] Setting source spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May 23 14:41:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed May 23 14:55:41 2012] Updating aperture counts using extracted products
[Wed May 23 14:55:41 2012] Error reading totcts from fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May 23 14:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 14:55:42 2012] Using photon index=1.80, rate=0.0201, arf fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10.arf
[Wed May 23 14:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 14:55:42 2012] Updating source flux to 3.6e-13
[Wed May 23 14:56:07 2012] Reading fit data from xmm0099840101/analysis//spectral/fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10_pl.csv
[Wed May 23 14:56:07 2012] Spectral fit parameter nH value = 9.15616e+20
[Wed May 23 14:56:07 2012] Spectral fit parameter PhoIndex value = 1.90888
[Wed May 23 14:56:07 2012] Failed to get F(0.3-8.0) from xmm0099840101/analysis//spectral/fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Wed May 23 14:56:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 14:56:07 2012] Using Nh = 9.2e+20, photon index=1.91, rate=0.0201, arf fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src10.arf
[Wed May 23 14:56:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 14:56:07 2012] Updating source flux to 3.7e-13