[Wed May 23 10:17:45 2012] Detection parameters:
  Position = (253.8, 412.0) = 2 15 47.24 -73 50 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 8.4
  Background counts = 4.2
  Rate = 0.004 +/- 0.0006

[Wed May 23 10:17:45 2012] Off-axis axis estimate = 8.85'
[Wed May 23 11:02:32 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Wed May 23 11:02:32 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Wed May 23 11:02:32 2012] source mask rpix=2.5, npix_max = 35, mask sum = 26, frac = 0.725
[Wed May 23 11:02:32 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.85"
[Wed May 23 11:43:36 2012] fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 23 11:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_src7.csv
[Wed May 23 11:43:36 2012] fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 23 11:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_src7.csv
[Wed May 23 11:43:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:43:36 2012] fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 23 11:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 23 11:43:36 2012] fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 23 11:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 23 11:43:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:17:56 2012] Spatial fit model total counts = 180.603000, observed total counts = 176.000000
[Wed May 23 12:17:56 2012] Offset between fit and detection position for source 3 = 9.138851 pixels
[Wed May 23 12:17:56 2012] Warning, changing simple spatial fit ID from 7 to 2
[Wed May 23 12:17:56 2012] 172.668018 total counts/ 172.668000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 9.138851 pixels
  Position = (248.2, 404.8) = 2 15 53.07 -73 51 21.7
  Extent = 22.3 (2.8-41.8)", rotation angle = 0
  Source counts = 0.0 +/- 13.1
  Background counts = 172.7
  Rate = 1e-09 +/- 0.001
  Deleting source due to low Poisson probability