[Mon May 27 01:36:41 2013] Detection parameters:
  Position = (235.6, 340.6) = 17 57 33.06 -21 36 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 12.2
  Background counts = 31.3
  Rate = 0.002 +/- 0.0003

[Mon May 27 01:36:41 2013] Off-axis axis estimate = 5.49'
[Mon May 27 02:35:01 2013] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:35:01 2013] Initial guess for spatial extent in simple fitting = 9.17"
[Mon May 27 02:35:01 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Mon May 27 02:35:01 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.17"
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 27 03:13:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src13.csv
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 27 03:13:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src13.csv
[Mon May 27 03:13:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 27 03:13:39 2013] Fit fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon May 27 03:39:50 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.282121 pixels away
[Mon May 27 03:39:50 2013] Vigneting correction estimate = 1.000000
[Mon May 27 03:39:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 03:39:50 2013] Assessing source extent using major
[Mon May 27 03:39:50 2013] Source does appear to be extended
[Mon May 27 03:39:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:39:46 2013] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:39:46 2013] Initial guess for spatial extent in simple fitting = 9.17"
[Mon May 27 04:39:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Mon May 27 04:39:46 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.17"
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src12.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src12.csv
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src12.csv
[Mon May 27 05:16:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 27 05:16:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 05:43:06 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.629102 pixels away
[Mon May 27 05:43:06 2013] Vigneting correction estimate = 1.000000
[Mon May 27 05:43:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 05:43:06 2013] Assessing source extent using major
[Mon May 27 05:43:06 2013] Source does appear to be extended
[Mon May 27 05:43:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 06:40:17 2013] XMMSAS src. selection expression = ellipse(20444.775070, 29586.979492, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 06:40:17 2013] Writing source region out to fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9_src.reg
[Mon May 27 06:40:17 2013] Extracting stamp from image fullrun_mos1_xmm0099760201_pi300-10000_cl_sm2.00.img.gz, (198, 303) - (273, 378)
[Mon May 27 06:40:17 2013] XMMSAS bgd. selection expression = annulus(20444.775070, 29586.979492, 1087.500000, 2175.000000, X, Y) && !ellipse(21448.229000, 31570.977800, 437.483213, 437.483213, 0.000000, X, Y)
[Mon May 27 06:40:17 2013] Writing fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9.gif
[Mon May 27 06:47:32 2013] Mean detx,y = (-5038.08, 4051.30) 
[Mon May 27 06:47:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 06:47:55 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 06:47:56 2013] Setting source spectrum file to fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 27 06:47:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 27 07:08:08 2013] Not generating rmf since there are only 67 counts
[Mon May 27 07:08:08 2013] rmf not generated due to insufficient counts
[Mon May 27 07:26:15 2013] Updating aperture counts using extracted products
[Mon May 27 07:26:15 2013] Total counts from fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 228.00
[Mon May 27 07:26:15 2013] Total counts from fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1586.00
[Mon May 27 07:26:15 2013] Got source and background scale factors 1221400.000000, 10346151.000000
[Mon May 27 07:26:15 2013] User source parameters:
  Position = (235.6, 340.6) = 17 57 33.06 -21 36 28.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.8 +/- 16.1
  Background aperture counts = 187.2
  Rate = 0.0008 +/- 0.0003

[Mon May 27 07:26:15 2013] Updating counts from extracted products
[Mon May 27 07:26:15 2013] Set source signif. to 40.77/13.68 = 2.98
[Mon May 27 07:26:17 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 07:26:17 2013] Using photon index=1.80, rate=0.000839, arf fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9.arf
[Mon May 27 07:26:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 07:26:18 2013] Updating source flux to 1.6e-14
[Mon May 27 07:26:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 07:26:27 2013] xmm0099760201/analysis//spectral/fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete