[Mon May 27 01:36:41 2013] Detection parameters:
  Position = (285.8, 240.8) = 17 57 17.39 -21 43 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.7 +/- 13.1
  Background counts = 27.5
  Rate = 0.002 +/- 0.0003

[Mon May 27 01:36:41 2013] Off-axis axis estimate = 4.28'
[Mon May 27 02:35:01 2013] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:35:01 2013] Initial guess for spatial extent in simple fitting = 8.57"
[Mon May 27 02:35:01 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.820
[Mon May 27 02:35:01 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.57"
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 27 03:13:39 2013] Fit fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src8 appears to have run properly
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 27 03:13:39 2013] Fit fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon May 27 03:39:50 2013] Spatial fit model total counts = 308.267000, observed total counts = 316.000000
[Mon May 27 03:39:50 2013] Offset between fit and detection position for source 18 = 0.442372 pixels
[Mon May 27 03:39:50 2013] 314.606000 total counts/ 283.067000 bgd. counts: snr = 1.874577
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.442372 pixels
  Position = (286.0, 240.4) = 17 57 17.34 -21 43 44.8
  Extent = 3.1 (2.1-4.9)", rotation angle = 0
  Source counts = 31.5 +/- 17.7
  Background counts = 283.1
  Rate = 0.0006 +/- 0.0004
[Mon May 27 03:39:50 2013] Vigneting correction estimate = 1.000000
[Mon May 27 03:39:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 03:39:50 2013] Assessing source extent using major axis lower bound
[Mon May 27 03:39:50 2013] Source does appear to be extended
[Mon May 27 03:39:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:39:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:39:46 2013] Initial guess for spatial extent in simple fitting = 3.08"
[Mon May 27 04:39:46 2013] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.686
[Mon May 27 04:39:46 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 3.08"
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src7.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src7.csv
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src7.csv
[Mon May 27 05:16:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon May 27 05:16:07 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon May 27 05:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon May 27 05:16:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 05:43:06 2013] Warning, spatial fit 7 centroid is now closest to src. 19
[Mon May 27 05:43:06 2013] Vigneting correction estimate = 1.000000
[Mon May 27 05:43:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 05:43:06 2013] Assessing source extent using major axis lower bound
[Mon May 27 05:43:06 2013] Source does appear to be extended
[Mon May 27 05:43:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 06:40:17 2013] XMMSAS src. selection expression = ellipse(24831.859200, 20863.376400, 184.617005, 184.617005, 0.000000, X, Y)
[Mon May 27 06:40:17 2013] Writing source region out to fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18_src.reg
[Mon May 27 06:40:17 2013] Extracting stamp from image fullrun_mos1_xmm0099760201_pi300-10000_cl_sm2.00.img.gz, (275, 230) - (297, 251)
[Mon May 27 06:40:17 2013] XMMSAS bgd. selection expression = annulus(24831.859200, 20863.376400, 307.695009, 615.390018, X, Y)
[Mon May 27 06:40:17 2013] Writing fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18.gif
[Mon May 27 06:44:45 2013] Mean detx,y = (3671.15, -258.32) 
[Mon May 27 06:44:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 06:45:04 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 06:45:04 2013] Setting source spectrum file to fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 27 06:45:04 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 27 07:07:25 2013] Not generating rmf since there are only 31 counts
[Mon May 27 07:07:25 2013] rmf not generated due to insufficient counts
[Mon May 27 07:26:13 2013] Updating aperture counts using extracted products
[Mon May 27 07:26:13 2013] Total counts from fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 60.00
[Mon May 27 07:26:13 2013] Total counts from fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 119.00
[Mon May 27 07:26:13 2013] Got source and background scale factors 105600.000000, 817216.000000
[Mon May 27 07:26:14 2013] User source parameters:
  Position = (286.0, 240.4) = 17 57 17.34 -21 43 44.8
  Extent = 3.1 (2.1-4.9)", rotation angle = 0
  Source aperture counts = 44.6 +/- 8.8
  Background aperture counts = 15.4
  Rate = 0.0009 +/- 0.0002

[Mon May 27 07:26:17 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 07:26:17 2013] Using photon index=1.80, rate=0.000649, arf fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18.arf
[Mon May 27 07:26:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 07:26:17 2013] Updating source flux to 1.6e-14
[Mon May 27 07:26:24 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 07:26:27 2013] xmm0099760201/analysis//spectral/fullrun_mos1_xmm0099760201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete