[Mon May 27 01:36:41 2013] Detection parameters:
  Position = (370.7, 167.4) = 17 56 50.86 -21 49 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.3 +/- 12.0
  Background counts = 27.2
  Rate = 0.001 +/- 0.0002

[Mon May 27 01:36:41 2013] Off-axis axis estimate = 10.85'
[Mon May 27 02:35:01 2013] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:35:01 2013] Initial guess for spatial extent in simple fitting = 11.85"
[Mon May 27 02:35:01 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.009
[Mon May 27 02:35:01 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 11.85"
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src17.ximg exists
[Mon May 27 03:13:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src17.csv
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon May 27 03:13:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src17.csv
[Mon May 27 03:13:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon May 27 03:13:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon May 27 03:13:39 2013] fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon May 27 03:13:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon May 27 03:13:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099760201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:39:50 2013] Spatial fit model total counts = 364.238000, observed total counts = 365.000000
[Mon May 27 03:39:50 2013] Offset between fit and detection position for source 12 = 8.771567 pixels
[Mon May 27 03:39:50 2013] Warning, changing simple spatial fit ID from 17 to 14
[Mon May 27 03:39:50 2013] 367.508017 total counts/ 367.508000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 8.771567 pixels
  Position = (362.4, 164.6) = 17 56 53.46 -21 49 14.5
  Extent = 22.7 (22.7-45.4)", rotation angle = 0
  Source counts = 0.0 +/- 19.2
  Background counts = 367.5
  Rate = 4e-10 +/- 0.0004
  Deleting source due to low Poisson probability