[Wed Jun 12 01:00:11 2013] Detection parameters:
  Position = (262.1, 351.1) = 11 4 34.83 38 16 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.3 +/- 25.0
  Background counts = 94.8
  Rate = 0.01 +/- 0.0008

[Wed Jun 12 01:00:14 2013] Off-axis axis estimate = 4.64'
[Wed Jun 12 01:00:45 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:45 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Jun 12 01:00:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.952
[Wed Jun 12 01:00:45 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.75"
[Wed Jun 12 01:00:46 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jun 12 01:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src9.csv
[Wed Jun 12 01:00:47 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jun 12 01:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src9.csv
[Wed Jun 12 01:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jun 12 01:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jun 12 01:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Jun 12 01:00:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:14 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.851548 pixels away
[Wed Jun 12 01:01:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:14 2013] Assessing source extent using major
[Wed Jun 12 01:01:14 2013] Source does appear to be extended
[Wed Jun 12 01:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:14 2013] Source is confused with source 8
[Wed Jun 12 01:01:30 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:30 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Jun 12 01:01:30 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.952
[Wed Jun 12 01:01:30 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.75"
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src8.csv
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src8.csv
[Wed Jun 12 01:01:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Jun 12 01:01:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:50 2013] Spatial fit model total counts = 2182.580000, observed total counts = 1511.000000
[Wed Jun 12 01:01:50 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:50 2013] Assessing source extent using major
[Wed Jun 12 01:01:50 2013] Source does appear to be extended
[Wed Jun 12 01:01:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 05:31:00 2013] XMMSAS src. selection expression = ellipse(22756.582092, 30496.658905, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 05:31:00 2013] Writing source region out to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9_src.reg
[Wed Jun 12 05:31:00 2013] Extracting stamp from image fullrun_mos2_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (225, 314) - (300, 389)
[Wed Jun 12 05:31:00 2013] XMMSAS bgd. selection expression = annulus(22756.582092, 30496.658905, 1087.500000, 2175.000000, X, Y) && !ellipse(21918.998672, 30789.205963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.740051, 29056.969269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22218.309418, 30598.635925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.917648, 29554.304047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20616.879800, 30395.107620, 774.560822, 447.113613, 196.677000, X, Y) && !ellipse(21322.928665, 29941.054199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.989243, 29967.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.539398, 31287.825775, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 05:31:00 2013] Writing fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9.gif
[Wed Jun 12 05:58:53 2013] Mean detx,y = (574.95, -7254.54) 
[Wed Jun 12 05:58:55 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 05:59:11 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 05:59:11 2013] Setting source spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 12 05:59:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Jun 12 10:40:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 10:40:15 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:13 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:13 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 1137.00
[Wed Jun 12 11:19:13 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1125.00
[Wed Jun 12 11:19:13 2013] Got source and background scale factors 1027908.000000, 2411040.000000
[Wed Jun 12 11:19:13 2013] User source parameters:
  Position = (262.1, 351.1) = 11 4 34.83 38 16 8.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 657.4 +/- 34.7
  Background aperture counts = 479.6
  Rate = 0.02 +/- 0.0008

[Wed Jun 12 11:19:13 2013] Updating counts from extracted products
[Wed Jun 12 11:19:13 2013] Set source signif. to 657.37/21.90 = 30.02
[Wed Jun 12 11:19:21 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:21 2013] Using photon index=1.80, rate=0.0157, arf fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9.arf
[Wed Jun 12 11:19:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:21 2013] Updating source flux to 2.3e-13
[Wed Jun 12 11:19:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:47 2013] xmm0099280401/analysis//spectral/fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete