[Wed Jun 12 01:00:10 2013] Detection parameters:
  Position = (255.9, 352.3) = 11 4 37.12 38 16 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.6 +/- 20.4
  Background counts = 91.3
  Rate = 0.007 +/- 0.0007

[Wed Jun 12 01:00:14 2013] Off-axis axis estimate = 4.97'
[Wed Jun 12 01:00:45 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:45 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Jun 12 01:00:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.577
[Wed Jun 12 01:00:45 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.91"
[Wed Jun 12 01:00:47 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jun 12 01:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src19.csv
[Wed Jun 12 01:00:47 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jun 12 01:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src19.csv
[Wed Jun 12 01:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 12 01:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 12 01:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Jun 12 01:00:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:14 2013] Warning, spatial fit 19 centroid is now closest to src. 6
[Wed Jun 12 01:01:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:14 2013] Assessing source extent using major
[Wed Jun 12 01:01:14 2013] Source does appear to be extended
[Wed Jun 12 01:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:14 2013] Source is confused with source 6
[Wed Jun 12 01:01:30 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:30 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Jun 12 01:01:30 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.577
[Wed Jun 12 01:01:30 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.91"
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src17.csv
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src17.csv
[Wed Jun 12 01:01:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:32 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jun 12 01:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 12 01:01:32 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jun 12 01:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 12 01:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:50 2013] Warning, spatial fit 17 centroid is now closest to src. 6
[Wed Jun 12 01:01:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:50 2013] Assessing source extent using major
[Wed Jun 12 01:01:50 2013] Source does appear to be extended
[Wed Jun 12 01:01:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 05:31:01 2013] XMMSAS src. selection expression = ellipse(22218.309418, 30598.635925, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 05:31:01 2013] Writing source region out to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8_src.reg
[Wed Jun 12 05:31:01 2013] Extracting stamp from image fullrun_mos2_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (218, 315) - (293, 390)
[Wed Jun 12 05:31:01 2013] XMMSAS bgd. selection expression = annulus(22218.309418, 30598.635925, 1087.500000, 2175.000000, X, Y) && !ellipse(21918.998672, 30789.205963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.740051, 29056.969269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22756.582092, 30496.658905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.917648, 29554.304047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19404.938156, 28604.448730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20616.879800, 30395.107620, 774.560822, 447.113613, 196.677000, X, Y) && !ellipse(19397.419113, 32977.648376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21322.928665, 29941.054199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.989243, 29967.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.539398, 31287.825775, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 05:31:01 2013] Writing fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8.gif
[Wed Jun 12 06:24:09 2013] Mean detx,y = (259.71, -7440.58) 
[Wed Jun 12 06:24:10 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 06:24:27 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 06:24:27 2013] Setting source spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jun 12 06:24:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jun 12 11:11:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 11:11:58 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:16 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:16 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 1351.00
[Wed Jun 12 11:19:16 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1590.00
[Wed Jun 12 11:19:16 2013] Got source and background scale factors 1095914.000000, 3558940.000000
[Wed Jun 12 11:19:16 2013] User source parameters:
  Position = (255.9, 352.3) = 11 4 37.12 38 16 13.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 861.4 +/- 37.8
  Background aperture counts = 489.6
  Rate = 0.02 +/- 0.0009

[Wed Jun 12 11:19:16 2013] Updating counts from extracted products
[Wed Jun 12 11:19:16 2013] Set source signif. to 861.39/22.13 = 38.93
[Wed Jun 12 11:19:21 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:21 2013] Using photon index=1.80, rate=0.0205, arf fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8.arf
[Wed Jun 12 11:19:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:21 2013] Updating source flux to 3.3e-13
[Wed Jun 12 11:19:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:47 2013] xmm0099280401/analysis//spectral/fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete