[Wed Jun 12 01:00:13 2013] Detection parameters:
  Position = (219.2, 327.2) = 11 4 50.69 38 14 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.3 +/- 18.5
  Background counts = 77.3
  Rate = 0.004 +/- 0.0006

[Wed Jun 12 01:00:14 2013] Off-axis axis estimate = 6.11'
[Wed Jun 12 01:00:45 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:45 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Wed Jun 12 01:00:45 2013] source mask rpix=2.2, npix_max = 28, mask sum = 34, frac = 1.183
[Wed Jun 12 01:00:45 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 9.49"
[Wed Jun 12 01:00:48 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src32.ximg exists
[Wed Jun 12 01:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src32.csv
[Wed Jun 12 01:00:48 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Jun 12 01:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src32.csv
[Wed Jun 12 01:00:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Jun 12 01:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Jun 12 01:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Jun 12 01:00:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:14 2013] Spatial fit model total counts = 1602.370000, observed total counts = 1223.000000
[Wed Jun 12 01:01:14 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:14 2013] Warning, spatial fit 32 centroid is now closest to src. 14
[Wed Jun 12 01:01:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:14 2013] Assessing source extent using major
[Wed Jun 12 01:01:14 2013] Source does appear to be extended
[Wed Jun 12 01:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:14 2013] Source is confused with source 14
[Wed Jun 12 01:01:30 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:30 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Wed Jun 12 01:01:30 2013] source mask rpix=2.2, npix_max = 28, mask sum = 34, frac = 1.183
[Wed Jun 12 01:01:30 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 9.49"
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src29.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src29.csv
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src29.csv
[Wed Jun 12 01:01:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:32 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Jun 12 01:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Jun 12 01:01:32 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Jun 12 01:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Jun 12 01:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:50 2013] Spatial fit model total counts = 1603.070000, observed total counts = 1223.000000
[Wed Jun 12 01:01:50 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:50 2013] Warning, spatial fit 29 centroid is now closest to src. 38
[Wed Jun 12 01:01:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:50 2013] Assessing source extent using major
[Wed Jun 12 01:01:50 2013] Source does appear to be extended
[Wed Jun 12 01:01:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 05:31:01 2013] XMMSAS src. selection expression = ellipse(19017.970291, 28414.784058, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 05:31:01 2013] Writing source region out to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39_src.reg
[Wed Jun 12 05:31:01 2013] Extracting stamp from image fullrun_mos2_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (182, 290) - (257, 365)
[Wed Jun 12 05:31:01 2013] XMMSAS bgd. selection expression = annulus(19017.970291, 28414.784058, 1087.500000, 2175.000000, X, Y) && !ellipse(21918.998672, 30789.205963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.740051, 29056.969269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.917648, 29554.304047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19404.938156, 28604.448730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20616.879800, 30395.107620, 774.560822, 447.113613, 196.677000, X, Y) && !ellipse(21322.928665, 29941.054199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18504.320358, 28995.311523, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 05:31:01 2013] Writing fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39.gif
[Wed Jun 12 06:28:43 2013] Mean detx,y = (-3573.48, -7256.41) 
[Wed Jun 12 06:28:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 06:28:57 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 06:28:58 2013] Setting source spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Jun 12 06:28:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed Jun 12 11:17:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 11:17:12 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:19 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:19 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 972.00
[Wed Jun 12 11:19:19 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39_bgd.pi.gz = 1512.00
[Wed Jun 12 11:19:19 2013] Got source and background scale factors 1025570.000000, 4023350.000000
[Wed Jun 12 11:19:19 2013] User source parameters:
  Position = (219.2, 327.2) = 11 4 50.69 38 14 21.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 586.6 +/- 32.2
  Background aperture counts = 385.4
  Rate = 0.01 +/- 0.0008

[Wed Jun 12 11:19:19 2013] Updating counts from extracted products
[Wed Jun 12 11:19:19 2013] Set source signif. to 586.58/19.63 = 29.88
[Wed Jun 12 11:19:22 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:22 2013] Using photon index=1.80, rate=0.014, arf fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39.arf
[Wed Jun 12 11:19:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:22 2013] Updating source flux to 2e-13
[Wed Jun 12 11:19:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:47 2013] xmm0099280401/analysis//spectral/fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete