[Wed Jun 12 01:00:13 2013] Detection parameters:
  Position = (279.3, 360.2) = 11 4 28.51 38 16 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.4 +/- 18.1
  Background counts = 88.3
  Rate = 0.004 +/- 0.0006

[Wed Jun 12 01:00:14 2013] Off-axis axis estimate = 4.69'
[Wed Jun 12 01:00:45 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:45 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Wed Jun 12 01:00:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.947
[Wed Jun 12 01:00:45 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 8.77"
[Wed Jun 12 01:00:48 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jun 12 01:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 01:00:48 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jun 12 01:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 01:00:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jun 12 01:00:50 2013] Fit fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jun 12 01:01:14 2013] Source 36 is offset by -4.499777 and -8.677267 pixels which is larger than
2 X fitted extent = 3.949917 x 3.949917, not incorporating fit results
[Wed Jun 12 01:01:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:14 2013] Assessing source extent using major
[Wed Jun 12 01:01:14 2013] Source does appear to be extended
[Wed Jun 12 01:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:30 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:30 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Wed Jun 12 01:01:30 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.947
[Wed Jun 12 01:01:30 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.77"
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src27.csv
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src27.csv
[Wed Jun 12 01:01:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:32 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 12 01:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 12 01:01:32 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 12 01:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 12 01:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:50 2013] Spatial fit model total counts = 1267.780000, observed total counts = 968.000000
[Wed Jun 12 01:01:50 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:50 2013] Assessing source extent using major
[Wed Jun 12 01:01:50 2013] Source does appear to be extended
[Wed Jun 12 01:01:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 05:31:01 2013] XMMSAS src. selection expression = ellipse(24246.539398, 31287.825775, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 05:31:01 2013] Writing source region out to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36_src.reg
[Wed Jun 12 05:31:01 2013] Extracting stamp from image fullrun_mos2_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (242, 323) - (317, 398)
[Wed Jun 12 05:31:01 2013] XMMSAS bgd. selection expression = annulus(24246.539398, 31287.825775, 1087.500000, 2175.000000, X, Y) && !ellipse(21918.998672, 30789.205963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22756.582092, 30496.658905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22218.309418, 30598.635925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.917648, 29554.304047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21322.928665, 29941.054199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.989243, 29967.500946, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 05:31:01 2013] Writing fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36.gif
[Wed Jun 12 06:28:04 2013] Mean detx,y = (2369.86, -7247.17) 
[Wed Jun 12 06:28:05 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 06:28:18 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 06:28:19 2013] Setting source spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Jun 12 06:28:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Jun 12 11:16:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 11:16:54 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:19 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:19 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 688.00
[Wed Jun 12 11:19:19 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36_bgd.pi.gz = 1814.00
[Wed Jun 12 11:19:19 2013] Got source and background scale factors 1026302.000000, 4436776.000000
[Wed Jun 12 11:19:19 2013] User source parameters:
  Position = (279.3, 360.2) = 11 4 28.51 38 16 45.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 268.4 +/- 27.2
  Background aperture counts = 419.6
  Rate = 0.006 +/- 0.0006

[Wed Jun 12 11:19:19 2013] Updating counts from extracted products
[Wed Jun 12 11:19:19 2013] Set source signif. to 268.39/20.48 = 13.10
[Wed Jun 12 11:19:22 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:22 2013] Using photon index=1.80, rate=0.0064, arf fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36.arf
[Wed Jun 12 11:19:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:22 2013] Updating source flux to 1e-13
[Wed Jun 12 11:19:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:47 2013] xmm0099280401/analysis//spectral/fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete