[Wed Jun 12 01:00:12 2013] Detection parameters:
  Position = (347.9, 185.5) = 11 4 3.19 38 4 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 399.5 +/- 26.7
  Background counts = 37.9
  Rate = 0.02 +/- 0.001

[Wed Jun 12 01:00:14 2013] Off-axis axis estimate = 8.94'
[Wed Jun 12 01:00:45 2013] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 01:00:45 2013] Initial guess for spatial extent in simple fitting = 10.90"
[Wed Jun 12 01:00:45 2013] source mask rpix=2.5, npix_max = 36, mask sum = 21, frac = 0.581
[Wed Jun 12 01:00:45 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.90"
[Wed Jun 12 01:00:46 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 12 01:00:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src6.csv
[Wed Jun 12 01:00:46 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 12 01:00:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src6.csv
[Wed Jun 12 01:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 12 01:00:50 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 12 01:00:50 2013] Fit fullrun_mos2_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jun 12 01:01:14 2013] Warning, spatial fit 6 centroid is now closest to src. 21
[Wed Jun 12 01:01:14 2013] Source 23 is offset by 6.238030 and -2.876229 pixels which is larger than
2 X fitted extent = 1.290883 x 1.290883, not incorporating fit results
[Wed Jun 12 01:01:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:14 2013] Assessing source extent using major
[Wed Jun 12 01:01:14 2013] Source does appear to be extended
[Wed Jun 12 01:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:30 2013] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:30 2013] Initial guess for spatial extent in simple fitting = 10.90"
[Wed Jun 12 01:01:30 2013] source mask rpix=2.5, npix_max = 36, mask sum = 21, frac = 0.581
[Wed Jun 12 01:01:30 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.90"
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src6.csv
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun 12 01:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src6.csv
[Wed Jun 12 01:01:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun 12 01:01:31 2013] fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun 12 01:01:31 2013] Fit fullrun_mos2_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jun 12 01:01:50 2013] Spatial fit model total counts = 1494.940000, observed total counts = 1417.000000
[Wed Jun 12 01:01:50 2013] Offset between fit and detection position for source 23 = 6.263968 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 6.263968 pixels
  Position = (344.7, 190.8) = 11 4 4.37 38 4 30.6
  Extent = 21.7 (21.6-21.8)", rotation angle = 0
  Source counts = 1481.6 +/- 38.5
  Background counts = 0.0
  Rate = 0.04 +/- 0.0009
[Wed Jun 12 01:01:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:50 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:50 2013] Source does appear to be extended
[Wed Jun 12 01:01:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:50 2013] Source is confused with source 20
[Wed Jun 12 01:01:50 2013] Source is confused with source 24
[Wed Jun 12 01:01:50 2013] Source is confused with source 22
[Wed Jun 12 05:31:00 2013] Counts = 1481.600000, rescaling region sizes by 2.000000
[Wed Jun 12 05:31:00 2013] XMMSAS src. selection expression = ellipse(29941.488000, 16554.292000, 2607.000075, 2607.000075, 0.000000, X, Y)
[Wed Jun 12 05:31:00 2013] Writing source region out to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23_src.reg
[Wed Jun 12 05:31:00 2013] Extracting stamp from image fullrun_mos2_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (195, 41) - (495, 341)
[Wed Jun 12 05:31:00 2013] XMMSAS bgd. selection expression = annulus(29941.488000, 16554.292000, 8690.000250, 17380.000500, X, Y) && !ellipse(25279.295349, 24625.709442, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26048.322000, 23427.644000, 3494.064101, 3494.064101, 0.000000, X, Y) && !ellipse(25778.491302, 23878.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24408.899750, 24159.900482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.998672, 30789.205963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.740051, 29056.969269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.414246, 23451.634247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25263.731567, 22940.118958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29403.750610, 17469.100540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29170.400085, 18065.542252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22756.582092, 30496.658905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32404.974000, 12009.916000, 1906.336055, 1906.336055, 0.000000, X, Y) && !ellipse(30492.029200, 15599.685000, 1796.912052, 308.424809, 59.698000, X, Y) && !ellipse(31821.308000, 13099.572000, 3580.472103, 3580.472103, 0.000000, X, Y) && !ellipse(33376.609009, 10302.512047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32958.250000, 10994.822000, 2182.152063, 2182.152063, 0.000000, X, Y) && !ellipse(33737.291800, 9709.136200, 1574.856045, 1574.856045, 0.000000, X, Y) && !ellipse(31129.317768, 14187.525160, 1374.616776, 798.712601, 91.934164, X, Y) && !ellipse(29427.024597, 17089.242844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32974.793880, 11109.934200, 2572.352074, 617.458418, 60.361700, X, Y) && !ellipse(22218.309418, 30598.635925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.917648, 29554.304047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19404.938156, 28604.448730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20616.879800, 30395.107620, 774.560822, 447.113613, 196.677000, X, Y) && !ellipse(30289.553345, 10930.962791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19397.419113, 32977.648376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35709.657593, 11371.103592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21322.928665, 29941.054199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.989243, 29967.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23028.873932, 14235.017319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.539398, 31287.825775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18504.320358, 28995.311523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19017.970291, 28414.784058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41044.782318, 27532.955902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40782.722961, 30035.793610, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 05:31:00 2013] Writing fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23.gif
[Wed Jun 12 05:53:44 2013] Mean detx,y = (140.64, 8646.49) 
[Wed Jun 12 05:53:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 05:58:23 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 05:58:23 2013] Setting source spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Jun 12 05:58:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Jun 12 11:19:12 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:12 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 6929.00
[Wed Jun 12 11:19:12 2013] Total counts from fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23_bgd.pi.gz = 44710.00
[Wed Jun 12 11:19:12 2013] Got source and background scale factors 17841320.000000, 254546913.000000
[Wed Jun 12 11:19:12 2013] User source parameters:
  Position = (344.7, 190.8) = 11 4 4.37 38 4 30.6
  Extent = 21.7 (21.6-21.8)", rotation angle = 0
  Source aperture counts = 3795.3 +/- 84.2
  Background aperture counts = 3133.7
  Rate = 0.09 +/- 0.002

[Wed Jun 12 11:19:21 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:21 2013] Using photon index=1.80, rate=0.0353, arf fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23.arf
[Wed Jun 12 11:19:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:21 2013] Updating source flux to 2.5e-12
[Wed Jun 12 11:19:40 2013] Flag b found in src. 23 procflags, skipping spectral fitting
[Wed Jun 12 11:19:40 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Wed Jun 12 11:19:47 2013] xmm0099280401/analysis//spectral/fullrun_mos2_xmm0099280401_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete