[Wed Jun 12 01:00:05 2013] Detection parameters:
  Position = (411.1, 131.7) = 11 3 39.94 38 0 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.7 +/- 20.4
  Background counts = 22.6
  Rate = 0.006 +/- 0.0005

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 14.59'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Wed Jun 12 01:00:37 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.048
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.72"
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src11.csv
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src11.csv
[Wed Jun 12 01:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 12 01:00:41 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 12 01:01:06 2013] Warning, spatial fit 11 centroid is now closest to src. 49
[Wed Jun 12 01:01:06 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.079743 pixels away
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Wed Jun 12 01:01:26 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.048
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 13.72"
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src11.csv
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src11.csv
[Wed Jun 12 01:01:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 512.876000, observed total counts = 503.000000
[Wed Jun 12 01:01:44 2013] Offset between fit and detection position for source 5 = 0.240887 pixels
[Wed Jun 12 01:01:44 2013] 508.601000 total counts/ 322.999000 bgd. counts: snr = 10.327188
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.240887 pixels
  Position = (411.0, 131.5) = 11 3 39.99 38 0 12.2
  Extent = 6.8 (5.6-8.1)", rotation angle = 0
  Source counts = 185.6 +/- 22.6
  Background counts = 323.0
  Rate = 0.004 +/- 0.0005
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:30 2013] XMMSAS src. selection expression = ellipse(35708.850000, 11395.251000, 407.107812, 407.107812, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 12 01:02:30 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (388, 108) - (434, 155)
[Wed Jun 12 01:02:30 2013] XMMSAS bgd. selection expression = annulus(35708.850000, 11395.251000, 678.513020, 1357.026039, X, Y) && !ellipse(32044.289440, 12840.846560, 2476.856071, 477.155214, 239.910000, X, Y) && !ellipse(32433.044760, 12177.543360, 3998.144115, 571.300016, 59.840000, X, Y) && !ellipse(33689.045800, 9918.964000, 2067.336059, 2067.336059, 0.000000, X, Y) && !ellipse(33892.786530, 9601.580330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32916.180000, 11231.070000, 2040.736059, 2040.736059, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5.gif
[Wed Jun 12 01:17:02 2013] Mean detx,y = (16054.85, -2763.55) 
[Wed Jun 12 01:17:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:17:17 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:17:17 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 12 01:17:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 12 11:18:56 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:18:56 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 253.00
[Wed Jun 12 11:18:57 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 235.00
[Wed Jun 12 11:18:57 2013] Got source and background scale factors 517392.000000, 2206581.000000
[Wed Jun 12 11:18:57 2013] User source parameters:
  Position = (411.0, 131.5) = 11 3 39.99 38 0 12.2
  Extent = 6.8 (5.6-8.1)", rotation angle = 0
  Source aperture counts = 197.9 +/- 16.9
  Background aperture counts = 55.1
  Rate = 0.005 +/- 0.0004

[Wed Jun 12 11:19:08 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:08 2013] Using photon index=1.80, rate=0.00442, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5.arf
[Wed Jun 12 11:19:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:08 2013] Updating source flux to 1.5e-13
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete