[Wed Jun 12 01:00:09 2013] Detection parameters:
  Position = (390.1, 110.9) = 11 3 47.68 37 58 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.7 +/- 20.5
  Background counts = 23.2
  Rate = 0.005 +/- 0.0005

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 15.13'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Wed Jun 12 01:00:37 2013] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 14.00"
[Wed Jun 12 01:00:39 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 01:00:39 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 01:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 12 01:00:43 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jun 12 01:01:06 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 11.848366 pixels away
[Wed Jun 12 01:01:06 2013] Warning, spatial fit 18 centroid is now closest to src. 47
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:06 2013] Source is confused with source 48
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Wed Jun 12 01:01:26 2013] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 14.00"
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 12 01:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 12 01:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 01:01:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Jun 12 01:01:44 2013] Warning, spatial fit 18 centroid is now closest to src. 47
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:30 2013] XMMSAS src. selection expression = ellipse(33892.786530, 9601.580330, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49_src.reg
[Wed Jun 12 01:02:30 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (353, 73) - (428, 148)
[Wed Jun 12 01:02:30 2013] XMMSAS bgd. selection expression = annulus(33892.786530, 9601.580330, 1087.500000, 2175.000000, X, Y) && !ellipse(35708.850000, 11395.251000, 542.810416, 542.810416, 0.000000, X, Y) && !ellipse(32044.289440, 12840.846560, 2476.856071, 477.155214, 239.910000, X, Y) && !ellipse(33281.511169, 10651.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32433.044760, 12177.543360, 3998.144115, 571.300016, 59.840000, X, Y) && !ellipse(33689.045800, 9918.964000, 2067.336059, 2067.336059, 0.000000, X, Y) && !ellipse(31781.747400, 13295.713980, 1959.400056, 418.956012, 58.087000, X, Y) && !ellipse(32916.180000, 11231.070000, 2040.736059, 2040.736059, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49.gif
[Wed Jun 12 01:27:39 2013] Mean detx,y = (16628.94, -296.93) 
[Wed Jun 12 01:27:41 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:27:53 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:27:53 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Jun 12 01:27:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Jun 12 05:00:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 05:00:06 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:18:58 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:18:59 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 482.00
[Wed Jun 12 11:18:59 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49_bgd.pi.gz = 16.00
[Wed Jun 12 11:18:59 2013] Got source and background scale factors 1266034.000000, 176667.000000
[Wed Jun 12 11:18:59 2013] User source parameters:
  Position = (390.1, 110.9) = 11 3 47.68 37 58 42.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 367.3 +/- 23.0
  Background aperture counts = 114.7
  Rate = 0.009 +/- 0.0005

[Wed Jun 12 11:18:59 2013] Updating counts from extracted products
[Wed Jun 12 11:18:59 2013] Set source signif. to 367.34/10.71 = 34.31
[Wed Jun 12 11:19:08 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:08 2013] Using photon index=1.80, rate=0.00876, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49.arf
[Wed Jun 12 11:19:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:08 2013] Updating source flux to 2.6e-13
[Wed Jun 12 11:19:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete