[Wed Jun 12 01:00:09 2013] Detection parameters:
  Position = (378.3, 132.9) = 11 3 52.04 38 0 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.1 +/- 19.4
  Background counts = 27.2
  Rate = 0.004 +/- 0.0005

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 13.32'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 13.09"
[Wed Jun 12 01:00:37 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.09"
[Wed Jun 12 01:00:39 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src24.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src24.csv
[Wed Jun 12 01:00:39 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src24.csv
[Wed Jun 12 01:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Jun 12 01:00:43 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed Jun 12 01:01:06 2013] Warning, spatial fit 24 centroid is now closest to src. 44
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:06 2013] Source is confused with source 43
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 13.09"
[Wed Jun 12 01:01:26 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.09"
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jun 12 01:01:27 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src24 appears to have run properly
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 1047.590000, observed total counts = 1054.000000
[Wed Jun 12 01:01:44 2013] Offset between fit and detection position for source 45 = 3.338349 pixels
[Wed Jun 12 01:01:44 2013] Warning, changing simple spatial fit ID from 24 to 15
[Wed Jun 12 01:01:44 2013] 1022.593600 total counts/ 11.803600 bgd. counts: snr = 294.207470
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 3.338349 pixels
  Position = (378.9, 129.7) = 11 3 51.81 38 0 4.2
  Extent = 25.5 (23.0-27.0)", rotation angle = 0
  Source counts = 1010.8 +/- 32.0
  Background counts = 11.8
  Rate = 0.02 +/- 0.0008
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:30 2013] Counts = 1010.790000, rescaling region sizes by 2.000000
[Wed Jun 12 01:02:30 2013] XMMSAS src. selection expression = ellipse(32916.180000, 11231.070000, 3061.104088, 3061.104088, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45_src.reg
[Wed Jun 12 01:02:30 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (203, 0) - (555, 306)
[Wed Jun 12 01:02:31 2013] XMMSAS bgd. selection expression = annulus(32916.180000, 11231.070000, 10203.680294, 20407.360587, X, Y) && !ellipse(25376.280914, 24983.551636, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24389.133057, 24437.927185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20606.973465, 29020.252869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.844000, 17344.626000, 2421.208070, 2421.208070, 0.000000, X, Y) && !ellipse(30349.943400, 15758.119600, 1685.464048, 348.180010, 239.780000, X, Y) && !ellipse(29043.637000, 18066.086800, 663.281619, 663.281619, 0.000000, X, Y) && !ellipse(31174.164651, 14309.893488, 2318.576067, 466.311374, 239.154040, X, Y) && !ellipse(29984.892000, 16454.054000, 1684.936048, 1684.936048, 0.000000, X, Y) && !ellipse(29035.494000, 18055.402000, 1591.456046, 1591.456046, 0.000000, X, Y) && !ellipse(22466.992737, 30307.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31239.250700, 14192.455620, 2367.184068, 446.797613, 238.872000, X, Y) && !ellipse(35708.850000, 11395.251000, 542.810416, 542.810416, 0.000000, X, Y) && !ellipse(32044.289440, 12840.846560, 2476.856071, 477.155214, 239.910000, X, Y) && !ellipse(30260.454224, 10925.231247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.026800, 33222.056000, 1643.344047, 677.916820, 56.671800, X, Y) && !ellipse(33281.511169, 10651.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32433.044760, 12177.543360, 3998.144115, 571.300016, 59.840000, X, Y) && !ellipse(33689.045800, 9918.964000, 2067.336059, 2067.336059, 0.000000, X, Y) && !ellipse(33892.786530, 9601.580330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31781.747400, 13295.713980, 1959.400056, 418.956012, 58.087000, X, Y) && !ellipse(19744.572400, 16062.216600, 351.688810, 351.688810, 0.000000, X, Y) && !ellipse(20607.758000, 33084.348000, 1580.616045, 1580.616045, 0.000000, X, Y) && !ellipse(40703.653600, 30067.706200, 553.988816, 553.988816, 0.000000, X, Y) && !ellipse(19397.358047, 28790.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.669128, 14244.297974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21224.943481, 30049.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18064.823000, 28308.437600, 496.372014, 496.372014, 0.000000, X, Y) && !ellipse(15895.775000, 23792.925400, 504.936815, 504.936815, 0.000000, X, Y) && !ellipse(23753.951813, 30934.754669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.406000, 29471.976000, 807.720023, 807.720023, 0.000000, X, Y) && !ellipse(41016.065521, 27546.347870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(23475.135400, 32011.903600, 483.451214, 483.451214, 0.000000, X, Y) && !ellipse(18954.708908, 28200.039978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.210480, 26388.574554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39752.241200, 22893.049400, 907.760026, 456.428813, 114.537960, X, Y) && !ellipse(24323.099823, 31277.049011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11527.852628, 24375.749319, 1034.080516, 220.115986, 83.471646, X, Y)
[Wed Jun 12 01:02:31 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45.gif
[Wed Jun 12 01:29:26 2013] Mean detx,y = (14485.57, -269.24) 
[Wed Jun 12 01:29:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:35:52 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:35:53 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Jun 12 01:35:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed Jun 12 11:19:00 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:00 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 6044.00
[Wed Jun 12 11:19:00 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45_bgd.pi.gz = 33423.00
[Wed Jun 12 11:19:00 2013] Got source and background scale factors 26954820.000000, 207538355.000000
[Wed Jun 12 11:19:00 2013] User source parameters:
  Position = (378.9, 129.7) = 11 3 51.81 38 0 4.2
  Extent = 25.5 (23.0-27.0)", rotation angle = 0
  Source aperture counts = 1703.1 +/- 78.7
  Background aperture counts = 4340.9
  Rate = 0.04 +/- 0.002

[Wed Jun 12 11:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:09 2013] Using photon index=1.80, rate=0.0241, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45.arf
[Wed Jun 12 11:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:09 2013] Updating source flux to 4.8e-13
[Wed Jun 12 11:19:24 2013] Flag c found in src. 45 procflags, skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete