[Wed Jun 12 01:00:09 2013] Detection parameters:
  Position = (374.1, 139.1) = 11 3 53.57 38 0 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.9 +/- 21.0
  Background counts = 28.7
  Rate = 0.005 +/- 0.0005

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 12.79'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 12.82"
[Wed Jun 12 01:00:37 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.031
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.82"
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src16.csv
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src16.csv
[Wed Jun 12 01:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jun 12 01:00:43 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Jun 12 01:01:06 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 14.208218 pixels away
[Wed Jun 12 01:01:06 2013] Warning, spatial fit 16 centroid is now closest to src. 42
[Wed Jun 12 01:01:06 2013] Spatial fit model total counts = 984.177000, observed total counts = 991.000000
[Wed Jun 12 01:01:06 2013] Offset between fit and detection position for source 44 = 0.855782 pixels
[Wed Jun 12 01:01:06 2013] Warning, changing simple spatial fit ID from 16 to 24
[Wed Jun 12 01:01:06 2013] 950.228900 total counts/ 18.019900 bgd. counts: snr = 219.602411
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.855782 pixels
  Position = (374.0, 140.0) = 11 3 53.62 38 0 49.3
  Extent = 25.0 (22.9-26.2)", rotation angle = 0
  Source counts = 932.2 +/- 30.8
  Background counts = 18.0
  Rate = 0.02 +/- 0.0007
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:06 2013] Source is confused with source 43
[Wed Jun 12 01:01:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 24.99"
[Wed Jun 12 01:01:26 2013] source mask rpix=5.7, npix_max = 155, mask sum = 144, frac = 0.923
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 24.99"
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src16.ximg exists
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Jun 12 01:01:27 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src16 appears to have run properly
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 2727.470000, observed total counts = 2722.000000
[Wed Jun 12 01:01:44 2013] Offset between fit and detection position for source 44 = 0.812163 pixels
[Wed Jun 12 01:01:44 2013] 2732.950000 total counts/ 1625.410000 bgd. counts: snr = 27.471221
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.812163 pixels
  Position = (373.4, 140.5) = 11 3 53.85 38 0 51.6
  Extent = 50.0 (49.6-100.0)" x 7.1 (6.5-7.8)", rotation angle = 60 (59-61) degrees
  Source counts = 1107.5 +/- 52.3
  Background counts = 1625.4
  Rate = 0.03 +/- 0.001
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.35
[Wed Jun 12 01:01:44 2013] Source is asymmetric
[Wed Jun 12 01:02:30 2013] Counts = 1107.540000, rescaling region sizes by 2.000000
[Wed Jun 12 01:02:30 2013] XMMSAS src. selection expression = ellipse(32433.044760, 12177.543360, 5997.216173, 856.950025, 59.840000, X, Y)
[Wed Jun 12 01:02:30 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44_src.reg
[Wed Jun 12 01:02:30 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (29, 0) - (595, 485)
[Wed Jun 12 01:02:30 2013] XMMSAS bgd. selection expression = annulus(32433.044760, 12177.543360, 19990.720575, 39981.441150, X, Y) && !ellipse(25376.280914, 24983.551636, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24389.133057, 24437.927185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20606.973465, 29020.252869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.844000, 17344.626000, 2421.208070, 2421.208070, 0.000000, X, Y) && !ellipse(30349.943400, 15758.119600, 1685.464048, 348.180010, 239.780000, X, Y) && !ellipse(29043.637000, 18066.086800, 663.281619, 663.281619, 0.000000, X, Y) && !ellipse(31174.164651, 14309.893488, 2318.576067, 466.311374, 239.154040, X, Y) && !ellipse(29984.892000, 16454.054000, 1684.936048, 1684.936048, 0.000000, X, Y) && !ellipse(29035.494000, 18055.402000, 1591.456046, 1591.456046, 0.000000, X, Y) && !ellipse(22466.992737, 30307.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31239.250700, 14192.455620, 2367.184068, 446.797613, 238.872000, X, Y) && !ellipse(35708.850000, 11395.251000, 542.810416, 542.810416, 0.000000, X, Y) && !ellipse(32044.289440, 12840.846560, 2476.856071, 477.155214, 239.910000, X, Y) && !ellipse(30260.454224, 10925.231247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.026800, 33222.056000, 1643.344047, 677.916820, 56.671800, X, Y) && !ellipse(33281.511169, 10651.658356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33689.045800, 9918.964000, 2067.336059, 2067.336059, 0.000000, X, Y) && !ellipse(33892.786530, 9601.580330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33658.741368, 35925.638457, 502.827214, 382.346615, 18.912156, X, Y) && !ellipse(31781.747400, 13295.713980, 1959.400056, 418.956012, 58.087000, X, Y) && !ellipse(19352.023608, 32957.321000, 240.863207, 240.863207, 0.000000, X, Y) && !ellipse(19744.572400, 16062.216600, 351.688810, 351.688810, 0.000000, X, Y) && !ellipse(20607.758000, 33084.348000, 1580.616045, 1580.616045, 0.000000, X, Y) && !ellipse(32916.180000, 11231.070000, 2040.736059, 2040.736059, 0.000000, X, Y) && !ellipse(40703.653600, 30067.706200, 553.988816, 553.988816, 0.000000, X, Y) && !ellipse(19397.358047, 28790.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11626.929800, 27978.296000, 390.544811, 390.544811, 0.000000, X, Y) && !ellipse(23022.669128, 14244.297974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20998.940750, 32578.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21224.943481, 30049.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19961.689884, 34038.976938, 992.744029, 655.745785, 69.150204, X, Y) && !ellipse(18064.823000, 28308.437600, 496.372014, 496.372014, 0.000000, X, Y) && !ellipse(15895.775000, 23792.925400, 504.936815, 504.936815, 0.000000, X, Y) && !ellipse(23753.951813, 30934.754669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.406000, 29471.976000, 807.720023, 807.720023, 0.000000, X, Y) && !ellipse(41016.065521, 27546.347870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(23475.135400, 32011.903600, 483.451214, 483.451214, 0.000000, X, Y) && !ellipse(18954.708908, 28200.039978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26635.001099, 36103.353302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.210480, 26388.574554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39752.241200, 22893.049400, 907.760026, 456.428813, 114.537960, X, Y) && !ellipse(32349.112671, 32560.543274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.080000, 34566.790000, 1694.480049, 1694.480049, 0.000000, X, Y) && !ellipse(24323.099823, 31277.049011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11527.852628, 24375.749319, 1034.080516, 220.115986, 83.471646, X, Y)
[Wed Jun 12 01:02:30 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44.gif
[Wed Jun 12 01:19:05 2013] Mean detx,y = (13579.50, -570.68) 
[Wed Jun 12 01:19:08 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:26:44 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:26:44 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Jun 12 01:26:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed Jun 12 11:18:58 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:18:58 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 2878.00
[Wed Jun 12 11:18:58 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44_bgd.pi.gz = 41684.00
[Wed Jun 12 11:18:58 2013] Got source and background scale factors 15370580.000000, 266121391.000000
[Wed Jun 12 11:18:58 2013] User source parameters:
  Position = (373.4, 140.5) = 11 3 53.85 38 0 51.6
  Extent = 50.0 (49.6-100.0)" x 7.1 (6.5-7.8)", rotation angle = 60 (59-61) degrees
  Source aperture counts = 470.4 +/- 54.7
  Background aperture counts = 2407.6
  Rate = 0.01 +/- 0.001

[Wed Jun 12 11:19:08 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:08 2013] Using photon index=1.80, rate=0.0264, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44.arf
[Wed Jun 12 11:19:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:08 2013] Updating source flux to 4.9e-13
[Wed Jun 12 11:19:24 2013] Flag c found in src. 44 procflags, skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete