[Wed Jun 12 01:00:08 2013] Detection parameters:
  Position = (334.6, 207.8) = 11 4 8.09 38 5 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 439.9 +/- 27.5
  Background counts = 50.4
  Rate = 0.01 +/- 0.0009

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 7.08'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Jun 12 01:00:37 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.931
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.97"
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 12 01:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 12 01:00:41 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 12 01:01:06 2013] Spatial fit model total counts = 1287.010000, observed total counts = 1291.000000
[Wed Jun 12 01:01:06 2013] Offset between fit and detection position for source 34 = 0.368534 pixels
[Wed Jun 12 01:01:06 2013] 1274.770000 total counts/ 913.532000 bgd. counts: snr = 11.951751
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.368534 pixels
  Position = (334.4, 208.1) = 11 4 8.17 38 5 45.7
  Extent = 7.9 (6.6-9.6)", rotation angle = 0
  Source counts = 361.2 +/- 35.7
  Background counts = 913.5
  Rate = 0.009 +/- 0.0009
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:06 2013] Source is confused with source 3
[Wed Jun 12 01:01:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 7.92"
[Wed Jun 12 01:01:26 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.929
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.92"
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src5.csv
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src5.csv
[Wed Jun 12 01:01:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 1122.210000, observed total counts = 1204.000000
[Wed Jun 12 01:01:44 2013] Offset between fit and detection position for source 34 = 0.114561 pixels
[Wed Jun 12 01:01:44 2013] 987.948000 total counts/ 581.498000 bgd. counts: snr = 16.855165
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.114561 pixels
  Position = (334.4, 208.2) = 11 4 8.17 38 5 46.2
  Extent = 8.3 (6.8-9.7)", rotation angle = 0
  Source counts = 406.4 +/- 31.4
  Background counts = 581.5
  Rate = 0.01 +/- 0.0007
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:30 2013] XMMSAS src. selection expression = ellipse(29043.637000, 18066.086800, 497.461214, 497.461214, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34_src.reg
[Wed Jun 12 01:02:30 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (306, 180) - (363, 237)
[Wed Jun 12 01:02:30 2013] XMMSAS bgd. selection expression = annulus(29043.637000, 18066.086800, 829.102024, 1658.204048, X, Y) && !ellipse(29394.844000, 17344.626000, 2421.208070, 2421.208070, 0.000000, X, Y) && !ellipse(30349.943400, 15758.119600, 1685.464048, 348.180010, 239.780000, X, Y) && !ellipse(31174.164651, 14309.893488, 2318.576067, 466.311374, 239.154040, X, Y) && !ellipse(29984.892000, 16454.054000, 1684.936048, 1684.936048, 0.000000, X, Y) && !ellipse(29035.494000, 18055.402000, 1591.456046, 1591.456046, 0.000000, X, Y) && !ellipse(31239.250700, 14192.455620, 2367.184068, 446.797613, 238.872000, X, Y)
[Wed Jun 12 01:02:30 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34.gif
[Wed Jun 12 01:02:57 2013] Mean detx,y = (7053.86, -245.73) 
[Wed Jun 12 01:02:58 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:03:08 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:03:09 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Jun 12 01:03:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Jun 12 11:18:55 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:18:55 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 753.00
[Wed Jun 12 11:18:55 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34_bgd.pi.gz = 0.00
[Wed Jun 12 11:18:55 2013] Got source and background scale factors 668518.000000, 20.000000
[Wed Jun 12 11:18:55 2013] User source parameters:
  Position = (334.4, 208.2) = 11 4 8.17 38 5 46.2
  Extent = 8.3 (6.8-9.7)", rotation angle = 0
  Source aperture counts = 753.0 +/- 28.5
  Background aperture counts = 0.0
  Rate = 0.02 +/- 0.0007

[Wed Jun 12 11:19:08 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:08 2013] Using photon index=1.80, rate=0.00969, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34.arf
[Wed Jun 12 11:19:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:08 2013] Updating source flux to 1.6e-13
[Wed Jun 12 11:19:24 2013] Flag c found in src. 34 procflags, skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete