[Wed Jun 12 01:00:07 2013] Detection parameters:
  Position = (218.4, 324.7) = 11 4 50.96 38 14 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 15.7
  Background counts = 73.0
  Rate = 0.003 +/- 0.0004

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 6.11'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Wed Jun 12 01:00:37 2013] source mask rpix=2.2, npix_max = 28, mask sum = 19, frac = 0.662
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 9.48"
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src40.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src40.csv
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src40.csv
[Wed Jun 12 01:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Jun 12 01:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src40.csv
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Jun 12 01:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src40.csv
[Wed Jun 12 01:00:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:06 2013] Spatial fit model total counts = 2742.450000, observed total counts = 909.000000
[Wed Jun 12 01:01:06 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Wed Jun 12 01:01:26 2013] source mask rpix=2.2, npix_max = 28, mask sum = 19, frac = 0.662
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 9.48"
[Wed Jun 12 01:01:28 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src40.ximg exists
[Wed Jun 12 01:01:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src40.csv
[Wed Jun 12 01:01:28 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed Jun 12 01:01:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src40.csv
[Wed Jun 12 01:01:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:30 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed Jun 12 01:01:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed Jun 12 01:01:30 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed Jun 12 01:01:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed Jun 12 01:01:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 1213.590000, observed total counts = 1064.000000
[Wed Jun 12 01:01:44 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:44 2013] Source 27 is offset by 8.491171 and -0.653628 pixels which is larger than
2 X fitted extent = 5.705425 x 2.257789, not incorporating fit results
[Wed Jun 12 01:01:44 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 13.347782 pixels away
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:31 2013] XMMSAS src. selection expression = ellipse(18954.708908, 28200.039978, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27_src.reg
[Wed Jun 12 01:02:31 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (181, 287) - (256, 362)
[Wed Jun 12 01:02:31 2013] XMMSAS bgd. selection expression = annulus(18954.708908, 28200.039978, 1087.500000, 2175.000000, X, Y) && !ellipse(20606.973465, 29020.252869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19397.358047, 28790.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21224.943481, 30049.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18064.823000, 28308.437600, 496.372014, 496.372014, 0.000000, X, Y) && !ellipse(20516.406000, 29471.976000, 807.720023, 807.720023, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(16015.210480, 26388.574554, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27.gif
[Wed Jun 12 01:40:27 2013] Mean detx,y = (-6951.65, 3561.35) 
[Wed Jun 12 01:40:29 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:40:47 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:40:47 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun 12 01:40:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jun 12 05:26:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 05:26:46 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:05 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:05 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 641.00
[Wed Jun 12 11:19:05 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1559.00
[Wed Jun 12 11:19:05 2013] Got source and background scale factors 937296.000000, 4106654.000000
[Wed Jun 12 11:19:05 2013] User source parameters:
  Position = (218.4, 324.7) = 11 4 50.96 38 14 5.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 285.2 +/- 26.3
  Background aperture counts = 355.8
  Rate = 0.007 +/- 0.0006

[Wed Jun 12 11:19:05 2013] Updating counts from extracted products
[Wed Jun 12 11:19:05 2013] Set source signif. to 285.18/18.86 = 15.12
[Wed Jun 12 11:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:09 2013] Using photon index=1.80, rate=0.0068, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27.arf
[Wed Jun 12 11:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:10 2013] Updating source flux to 1.3e-13
[Wed Jun 12 11:19:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete