[Wed Jun 12 01:00:07 2013] Detection parameters:
  Position = (468.8, 346.8) = 11 3 18.49 38 15 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.5 +/- 16.8
  Background counts = 18.3
  Rate = 0.004 +/- 0.0004

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 12.84'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 12.85"
[Wed Jun 12 01:00:37 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.027
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 12.85"
[Wed Jun 12 01:00:39 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src25.csv
[Wed Jun 12 01:00:39 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun 12 01:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src25.csv
[Wed Jun 12 01:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:43 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun 12 01:00:45 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Jun 12 01:01:06 2013] Spatial fit model total counts = 407.791000, observed total counts = 408.000000
[Wed Jun 12 01:01:06 2013] Offset between fit and detection position for source 23 = 0.743122 pixels
[Wed Jun 12 01:01:06 2013] 406.996000 total counts/ 298.662000 bgd. counts: snr = 6.268661
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.743122 pixels
  Position = (468.4, 346.2) = 11 3 18.64 38 15 45.3
  Extent = 6.9 (5.5-8.6)", rotation angle = 0
  Source counts = 108.3 +/- 20.2
  Background counts = 298.7
  Rate = 0.003 +/- 0.0005
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Wed Jun 12 01:01:26 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.143
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 6.92"
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jun 12 01:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src25.csv
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jun 12 01:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src25.csv
[Wed Jun 12 01:01:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Jun 12 01:01:44 2013] Warning, spatial fit 25 centroid is now closest to src. 29
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:31 2013] XMMSAS src. selection expression = ellipse(40703.653600, 30067.706200, 415.491612, 415.491612, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23_src.reg
[Wed Jun 12 01:02:31 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (445, 322) - (492, 370)
[Wed Jun 12 01:02:31 2013] XMMSAS bgd. selection expression = annulus(40703.653600, 30067.706200, 692.486020, 1384.972040, X, Y)
[Wed Jun 12 01:02:31 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23.gif
[Wed Jun 12 01:35:58 2013] Mean detx,y = (2230.51, -16275.70) 
[Wed Jun 12 01:35:59 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:36:06 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:36:06 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Jun 12 01:36:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Jun 12 11:19:01 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:01 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 179.00
[Wed Jun 12 11:19:01 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23_bgd.pi.gz = 429.00
[Wed Jun 12 11:19:01 2013] Got source and background scale factors 548800.000000, 4103964.000000
[Wed Jun 12 11:19:01 2013] User source parameters:
  Position = (468.4, 346.2) = 11 3 18.64 38 15 45.3
  Extent = 6.9 (5.5-8.6)", rotation angle = 0
  Source aperture counts = 121.6 +/- 14.4
  Background aperture counts = 57.4
  Rate = 0.003 +/- 0.0003

[Wed Jun 12 11:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:09 2013] Using photon index=1.80, rate=0.00258, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23.arf
[Wed Jun 12 11:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:09 2013] Updating source flux to 1e-13
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete