[Wed Jun 12 01:00:07 2013] Detection parameters:
  Position = (244.5, 346.0) = 11 4 41.33 38 15 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.8 +/- 18.2
  Background counts = 84.7
  Rate = 0.003 +/- 0.0006

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 5.21'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Wed Jun 12 01:00:37 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.03"
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 01:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jun 12 01:00:45 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jun 12 01:01:06 2013] Warning, spatial fit 30 centroid is now closest to src. 24
[Wed Jun 12 01:01:06 2013] Source 22 is offset by -2.743638 and -0.308946 pixels which is larger than
2 X fitted extent = 1.033246 x 1.033246, not incorporating fit results
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Wed Jun 12 01:01:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.03"
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src30.ximg exists
[Wed Jun 12 01:01:27 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Jun 12 01:01:27 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src30 appears to have run properly
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Jun 12 01:01:29 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Jun 12 01:01:44 2013] Warning, spatial fit 30 centroid is now closest to src. 24
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:31 2013] XMMSAS src. selection expression = ellipse(21224.943481, 30049.761719, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22_src.reg
[Wed Jun 12 01:02:31 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (207, 308) - (282, 383)
[Wed Jun 12 01:02:31 2013] XMMSAS bgd. selection expression = annulus(21224.943481, 30049.761719, 1087.500000, 2175.000000, X, Y) && !ellipse(20606.973465, 29020.252869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22466.992737, 30307.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.026800, 33222.056000, 1643.344047, 677.916820, 56.671800, X, Y) && !ellipse(20607.758000, 33084.348000, 1580.616045, 1580.616045, 0.000000, X, Y) && !ellipse(19397.358047, 28790.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20998.940750, 32578.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.951813, 30934.754669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.406000, 29471.976000, 807.720023, 807.720023, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(23475.135400, 32011.903600, 483.451214, 483.451214, 0.000000, X, Y) && !ellipse(18954.708908, 28200.039978, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22.gif
[Wed Jun 12 01:37:20 2013] Mean detx,y = (-7265.61, 650.49) 
[Wed Jun 12 01:37:22 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:37:32 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:37:32 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun 12 01:37:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jun 12 05:19:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 05:19:13 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:02 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:02 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 867.00
[Wed Jun 12 11:19:02 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22_bgd.pi.gz = 603.00
[Wed Jun 12 11:19:02 2013] Got source and background scale factors 1277060.000000, 1537975.000000
[Wed Jun 12 11:19:02 2013] User source parameters:
  Position = (244.5, 346.0) = 11 4 41.33 38 15 44.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 366.3 +/- 30.5
  Background aperture counts = 500.7
  Rate = 0.009 +/- 0.0007

[Wed Jun 12 11:19:02 2013] Updating counts from extracted products
[Wed Jun 12 11:19:02 2013] Set source signif. to 366.30/22.38 = 16.37
[Wed Jun 12 11:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:09 2013] Using photon index=1.80, rate=0.00873, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22.arf
[Wed Jun 12 11:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:09 2013] Updating source flux to 1.2e-13
[Wed Jun 12 11:19:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete