[Wed Jun 12 01:00:07 2013] Detection parameters:
  Position = (258.8, 348.9) = 11 4 36.06 38 15 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.1 +/- 20.7
  Background counts = 89.7
  Rate = 0.007 +/- 0.0008

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 4.65'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Wed Jun 12 01:00:37 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.752
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.76"
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src9.csv
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src9.csv
[Wed Jun 12 01:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Jun 12 01:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:06 2013] Warning, spatial fit 9 centroid is now closest to src. 20
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Wed Jun 12 01:01:26 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.752
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 8.76"
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 01:01:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 12 01:01:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 12 01:01:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 12 01:01:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:44 2013] Warning, spatial fit 9 centroid is now closest to src. 17
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:30 2013] XMMSAS src. selection expression = ellipse(22466.992737, 30307.342041, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 12 01:02:30 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (221, 311) - (296, 386)
[Wed Jun 12 01:02:30 2013] XMMSAS bgd. selection expression = annulus(22466.992737, 30307.342041, 1087.500000, 2175.000000, X, Y) && !ellipse(20606.973465, 29020.252869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.026800, 33222.056000, 1643.344047, 677.916820, 56.671800, X, Y) && !ellipse(20607.758000, 33084.348000, 1580.616045, 1580.616045, 0.000000, X, Y) && !ellipse(20998.940750, 32578.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21224.943481, 30049.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.951813, 30934.754669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.406000, 29471.976000, 807.720023, 807.720023, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(23475.135400, 32011.903600, 483.451214, 483.451214, 0.000000, X, Y) && !ellipse(24323.099823, 31277.049011, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21.gif
[Wed Jun 12 01:16:09 2013] Mean detx,y = (-7014.69, -405.09) 
[Wed Jun 12 01:16:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:16:22 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:16:22 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jun 12 01:16:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 12 04:39:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 04:39:00 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:18:56 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:18:56 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 891.00
[Wed Jun 12 11:18:56 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 130.00
[Wed Jun 12 11:18:56 2013] Got source and background scale factors 1009792.000000, 359167.000000
[Wed Jun 12 11:18:56 2013] User source parameters:
  Position = (258.8, 348.9) = 11 4 36.06 38 15 59.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 525.5 +/- 30.9
  Background aperture counts = 365.5
  Rate = 0.01 +/- 0.0007

[Wed Jun 12 11:18:56 2013] Updating counts from extracted products
[Wed Jun 12 11:18:56 2013] Set source signif. to 525.51/19.12 = 27.49
[Wed Jun 12 11:19:08 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:08 2013] Using photon index=1.80, rate=0.0125, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21.arf
[Wed Jun 12 11:19:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:08 2013] Updating source flux to 1.9e-13
[Wed Jun 12 11:19:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete