[Wed Jun 12 01:00:06 2013] Detection parameters:
  Position = (270.5, 368.1) = 11 4 31.75 38 17 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.9 +/- 16.2
  Background counts = 72.8
  Rate = 0.003 +/- 0.0006

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 5.44'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Wed Jun 12 01:00:37 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.107
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 9.15"
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src39.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src39.csv
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src39.csv
[Wed Jun 12 01:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Jun 12 01:00:45 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Jun 12 01:00:45 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Jun 12 01:01:06 2013] Spatial fit model total counts = 780.316000, observed total counts = 776.000000
[Wed Jun 12 01:01:06 2013] Offset between fit and detection position for source 16 = 0.449763 pixels
[Wed Jun 12 01:01:06 2013] 771.068800 total counts/ 707.642000 bgd. counts: snr = 2.384328
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.449763 pixels
  Position = (270.4, 368.5) = 11 4 31.78 38 17 23.5
  Extent = 6.0 (4.2-9.0)", rotation angle = 0
  Source counts = 63.4 +/- 27.8
  Background counts = 707.6
  Rate = 0.002 +/- 0.0007
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 6.04"
[Wed Jun 12 01:01:26 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.842
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 6.04"
[Wed Jun 12 01:01:28 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src39.ximg exists
[Wed Jun 12 01:01:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src39.csv
[Wed Jun 12 01:01:28 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Jun 12 01:01:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src39.csv
[Wed Jun 12 01:01:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:30 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Jun 12 01:01:30 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Jun 12 01:01:30 2013] Fit fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 780.320000, observed total counts = 776.000000
[Wed Jun 12 01:01:44 2013] Offset between fit and detection position for source 16 = 0.000451 pixels
[Wed Jun 12 01:01:44 2013] 771.063400 total counts/ 707.579000 bgd. counts: snr = 2.386600
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.000451 pixels
  Position = (270.4, 368.5) = 11 4 31.78 38 17 23.5
  Extent = 6.0 (4.2-8.9)", rotation angle = 0
  Source counts = 63.5 +/- 27.8
  Background counts = 707.6
  Rate = 0.002 +/- 0.0007
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:31 2013] XMMSAS src. selection expression = ellipse(23475.135400, 32011.903600, 362.588410, 362.588410, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16_src.reg
[Wed Jun 12 01:02:31 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (250, 348) - (291, 389)
[Wed Jun 12 01:02:31 2013] XMMSAS bgd. selection expression = annulus(23475.135400, 32011.903600, 604.314017, 1208.628035, X, Y) && !ellipse(22466.992737, 30307.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.951813, 30934.754669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(24323.099823, 31277.049011, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 01:02:31 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16.gif
[Wed Jun 12 01:40:12 2013] Mean detx,y = (-7897.43, -2209.01) 
[Wed Jun 12 01:40:14 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 01:40:22 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 01:40:22 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jun 12 01:40:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Jun 12 05:26:41 2013] Not generating rmf since there are only 63 counts
[Wed Jun 12 05:26:41 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:19:05 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:19:05 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 226.00
[Wed Jun 12 11:19:05 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16_bgd.pi.gz = 431.00
[Wed Jun 12 11:19:05 2013] Got source and background scale factors 414400.000000, 1379900.000000
[Wed Jun 12 11:19:05 2013] User source parameters:
  Position = (270.4, 368.5) = 11 4 31.78 38 17 23.5
  Extent = 6.0 (4.2-8.9)", rotation angle = 0
  Source aperture counts = 96.6 +/- 16.1
  Background aperture counts = 129.4
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 11:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:09 2013] Using photon index=1.80, rate=0.00151, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16.arf
[Wed Jun 12 11:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:09 2013] Updating source flux to 2.7e-14
[Wed Jun 12 11:19:24 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete