[Wed Jun 12 01:00:05 2013] Detection parameters:
  Position = (280.9, 281.5) = 11 4 27.89 38 11 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8001.0 +/- 102.1
  Background counts = 60.8
  Rate = 0.2 +/- 0.003

[Wed Jun 12 01:00:09 2013] Off-axis axis estimate = 1.77'
[Wed Jun 12 01:00:37 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:00:37 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Jun 12 01:00:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.998
[Wed Jun 12 01:00:37 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.31"
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src2.csv
[Wed Jun 12 01:00:38 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 12 01:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src2.csv
[Wed Jun 12 01:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 12 01:00:41 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 12 01:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 12 01:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:06 2013] Spatial fit model total counts = 34490.400000, observed total counts = 16615.000000
[Wed Jun 12 01:01:06 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:06 2013] Assessing source extent using major
[Wed Jun 12 01:01:06 2013] Source does appear to be extended
[Wed Jun 12 01:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:01:26 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:01:26 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Jun 12 01:01:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.998
[Wed Jun 12 01:01:26 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.31"
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src2.csv
[Wed Jun 12 01:01:26 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 12 01:01:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src2.csv
[Wed Jun 12 01:01:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 12 01:01:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 12 01:01:29 2013] fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 12 01:01:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 12 01:01:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = -2761.810000, observed total counts = 27342.000000
[Wed Jun 12 01:01:44 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:44 2013] Spatial fit model total counts = 32519.900000, observed total counts = 16615.000000
[Wed Jun 12 01:01:44 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 01:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 01:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 01:01:44 2013] Assessing source extent using major
[Wed Jun 12 01:01:44 2013] Source does appear to be extended
[Wed Jun 12 01:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 01:02:29 2013] Counts = 8000.971191, rescaling region sizes by 2.000000
[Wed Jun 12 01:02:29 2013] XMMSAS src. selection expression = ellipse(24389.133057, 24437.927185, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 12 01:02:29 2013] Not overwriting source region fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 01:02:29 2013] Extracting stamp from image fullrun_mos1_xmm0099280401_pi300-10000_cl_sm2.00.img.gz, (206, 206) - (356, 356)
[Wed Jun 12 01:02:30 2013] XMMSAS bgd. selection expression = annulus(24389.133057, 24437.927185, 4350.000000, 8700.000000, X, Y) && !ellipse(25376.280914, 24983.551636, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20606.973465, 29020.252869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.844000, 17344.626000, 2421.208070, 2421.208070, 0.000000, X, Y) && !ellipse(30349.943400, 15758.119600, 1685.464048, 348.180010, 239.780000, X, Y) && !ellipse(29043.637000, 18066.086800, 663.281619, 663.281619, 0.000000, X, Y) && !ellipse(31174.164651, 14309.893488, 2318.576067, 466.311374, 239.154040, X, Y) && !ellipse(29984.892000, 16454.054000, 1684.936048, 1684.936048, 0.000000, X, Y) && !ellipse(29035.494000, 18055.402000, 1591.456046, 1591.456046, 0.000000, X, Y) && !ellipse(22466.992737, 30307.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31239.250700, 14192.455620, 2367.184068, 446.797613, 238.872000, X, Y) && !ellipse(20569.026800, 33222.056000, 1643.344047, 677.916820, 56.671800, X, Y) && !ellipse(32433.044760, 12177.543360, 3998.144115, 571.300016, 59.840000, X, Y) && !ellipse(19352.023608, 32957.321000, 240.863207, 240.863207, 0.000000, X, Y) && !ellipse(19744.572400, 16062.216600, 351.688810, 351.688810, 0.000000, X, Y) && !ellipse(20607.758000, 33084.348000, 1580.616045, 1580.616045, 0.000000, X, Y) && !ellipse(19397.358047, 28790.037933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20998.940750, 32578.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21224.943481, 30049.761719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19961.689884, 34038.976938, 992.744029, 655.745785, 69.150204, X, Y) && !ellipse(18064.823000, 28308.437600, 496.372014, 496.372014, 0.000000, X, Y) && !ellipse(15895.775000, 23792.925400, 504.936815, 504.936815, 0.000000, X, Y) && !ellipse(23753.951813, 30934.754669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.406000, 29471.976000, 807.720023, 807.720023, 0.000000, X, Y) && !ellipse(21889.887604, 31080.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.560000, 31540.782000, 1465.128042, 1465.128042, 0.000000, X, Y) && !ellipse(23475.135400, 32011.903600, 483.451214, 483.451214, 0.000000, X, Y) && !ellipse(18954.708908, 28200.039978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.210480, 26388.574554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32349.112671, 32560.543274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.080000, 34566.790000, 1694.480049, 1694.480049, 0.000000, X, Y) && !ellipse(24323.099823, 31277.049011, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 01:02:30 2013] Writing fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 01:02:31 2013] ../../xmm0099280401/products/events/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0099280401/products/events/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Jun 12 01:02:32 2013] Mean detx,y = (-651.90, 184.73) 
[Wed Jun 12 01:02:32 2013] ../../xmm0099280401/products/images/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0099280401/products/images/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Jun 12 01:02:32 2013] ../../xmm0099280401/products/spectra/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0099280401/products/spectra/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Jun 12 01:02:32 2013] Setting source spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 01:02:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 12 01:02:32 2013] ../../xmm0099280401/products/lightcurves/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0099280401/products/lightcurves/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Jun 12 03:48:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 03:48:05 2013] rmf not generated due to insufficient counts
[Wed Jun 12 11:18:53 2013] Updating aperture counts using extracted products
[Wed Jun 12 11:18:54 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 37743.00
[Wed Jun 12 11:18:54 2013] Total counts from fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 12279.00
[Wed Jun 12 11:18:54 2013] Got source and background scale factors 1973954.000000, 39868696.000000
[Wed Jun 12 11:18:54 2013] User source parameters:
  Position = (280.9, 281.5) = 11 4 27.89 38 11 8.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37135.0 +/- 195.3
  Background aperture counts = 608.0
  Rate = 0.9 +/- 0.005

[Wed Jun 12 11:18:54 2013] Updating counts from extracted products
[Wed Jun 12 11:18:54 2013] Set source signif. to 37135.05/24.66 = 1506.09
[Wed Jun 12 11:19:07 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 11:19:07 2013] Using photon index=1.80, rate=0.885, arf fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1.arf
[Wed Jun 12 11:19:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 11:19:07 2013] Updating source flux to 9.8e-12
[Wed Jun 12 11:19:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 11:19:40 2013] xmm0099280401/analysis//spectral/fullrun_mos1_xmm0099280401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete