[Wed May 29 08:58:29 2013] Detection parameters:
  Position = (277.0, 301.9) = 11 4 33.92 38 14 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10497.1 +/- 153.1
  Background counts = 849.6
  Rate = 0.4 +/- 0.006

[Wed May 29 08:58:29 2013] Off-axis axis estimate = 1.58'
[Wed May 29 09:28:19 2013] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Wed May 29 09:28:19 2013] Initial guess for spatial extent in simple fitting = 7.22"
[Wed May 29 09:28:19 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Wed May 29 09:28:19 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.22"
[Wed May 29 12:56:44 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 29 12:56:44 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 29 12:56:44 2013] Fit fullrun_pn_xmm0099280301_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed May 29 12:56:44 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 29 12:56:44 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 29 12:56:44 2013] Fit fullrun_pn_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 30 02:06:56 2013] Spatial fit model total counts = 53833.200000, observed total counts = 55212.000000
[Thu May 30 02:06:56 2013] Offset between fit and detection position for source 2 = 5.207426 pixels
[Thu May 30 02:06:56 2013] 53938.500000 total counts/ 25600.000000 bgd. counts: snr = 177.115625
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.207426 pixels
  Position = (279.6, 297.4) = 11 4 32.96 38 14 8.3
  Extent = 14.4 (14.4-28.9)", rotation angle = 0
  Source counts = 28338.5 +/- 232.2
  Background counts = 25600.0
  Rate = 0.8 +/- 0.006
[Thu May 30 02:06:56 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:06:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:06:56 2013] Assessing source extent using major axis lower bound
[Thu May 30 02:06:56 2013] Source does appear to be extended
[Thu May 30 02:06:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 02:07:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 02:07:46 2013] Initial guess for spatial extent in simple fitting = 14.43"
[Thu May 30 02:07:46 2013] source mask rpix=3.3, npix_max = 58, mask sum = 49, frac = 0.840
[Thu May 30 02:07:46 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 14.43"
[Fri May 31 00:09:34 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 31 00:09:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_src2.csv
[Fri May 31 00:09:34 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 31 00:09:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_src2.csv
[Fri May 31 00:09:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 00:09:34 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 31 00:09:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 31 00:09:34 2013] fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 31 00:09:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 31 00:09:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:26 2013] Warning, spatial fit 2 centroid is now closest to src. 5
[Fri May 31 15:18:26 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:26 2013] Assessing source extent using major axis lower bound
[Fri May 31 15:18:26 2013] Source does appear to be extended
[Fri May 31 15:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 15:19:16 2013] Counts = 28338.500000, rescaling region sizes by 3.000000
[Fri May 31 15:19:16 2013] XMMSAS src. selection expression = ellipse(24274.418000, 25827.004000, 2598.102075, 2598.102075, 0.000000, X, Y)
[Fri May 31 15:19:16 2013] Writing source region out to fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2_src.reg
[Fri May 31 15:19:16 2013] Extracting stamp from image fullrun_pn_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (130, 148) - (429, 447)
[Fri May 31 15:19:16 2013] XMMSAS bgd. selection expression = annulus(24274.418000, 25827.004000, 12990.510374, 25981.020748, X, Y) && !ellipse(23572.138400, 26933.273000, 3608.880104, 1250.126436, 56.598500, X, Y) && !ellipse(25677.934723, 23239.181458, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(25578.902600, 23849.225400, 1942.322456, 1749.816050, 2.873440, X, Y) && !ellipse(25585.540000, 23787.256600, 2995.440086, 2625.576076, 1.111410, X, Y) && !ellipse(25575.371600, 23871.348000, 2271.540065, 2174.450463, 25.246000, X, Y)
[Fri May 31 15:19:16 2013] Writing fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2.gif
[Fri May 31 15:39:03 2013] Mean detx,y = (349.56, 111.68) 
[Fri May 31 15:39:41 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 15:46:01 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 15:46:02 2013] Setting source spectrum file to fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 31 15:46:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  2 11:08:23 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:08:23 2013] Total counts from fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 7263527.00
[Sun Jun  2 11:08:24 2013] Total counts from fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Sun Jun  2 11:08:24 2013] Got source and background scale factors 19673460.000000, 0.000000
[Sun Jun  2 11:08:24 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun  2 11:08:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:08:26 2013] Using photon index=1.80, rate=0.775, arf fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2.arf
[Sun Jun  2 11:08:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:08:26 2013] Updating source flux to 2.9e-12
[Sun Jun  2 11:10:36 2013] xmm0099280301/analysis//spectral/fullrun_pn_xmm0099280301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete