[Wed May 29 08:59:43 2013] Detection parameters:
  Position = (361.2, 99.9) = 11 4 2.91 37 59 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.9 +/- 18.1
  Background counts = 19.9
  Rate = 0.004 +/- 0.0004

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 15.10'
[Wed May 29 22:41:18 2013] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 13.98"
[Wed May 29 22:41:18 2013] source mask rpix=3.2, npix_max = 55, mask sum = 63, frac = 1.142
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.98"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src24.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src24.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src24.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 30 02:06:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 18.111868 pixels away
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 05:28:44 2013] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:44 2013] Initial guess for spatial extent in simple fitting = 13.98"
[Fri May 31 05:28:44 2013] source mask rpix=3.2, npix_max = 55, mask sum = 63, frac = 1.142
[Fri May 31 05:28:44 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.98"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src23.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src23.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 18.872589 pixels away
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(31373.519501, 8642.783539, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (324, 62) - (399, 137)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(31373.519501, 8642.783539, 1087.500000, 2175.000000, X, Y) && !ellipse(34264.472046, 10378.376190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33462.433200, 11680.212400, 2498.128072, 428.175212, 56.418800, X, Y) && !ellipse(34192.283920, 10567.268600, 2204.456063, 397.011211, 57.157100, X, Y) && !ellipse(33755.484000, 11229.573400, 2543.800073, 412.299212, 56.145900, X, Y) && !ellipse(32914.173440, 12542.505200, 2487.184072, 457.375213, 57.747600, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51.gif
[Sun Jun  2 09:02:53 2013] Mean detx,y = (-3595.45, 15815.76) 
[Sun Jun  2 09:02:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:03:23 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:03:23 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Jun  2 09:03:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun Jun  2 10:52:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 10:52:48 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:16 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:16 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 283.00
[Sun Jun  2 11:09:16 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51_bgd.pi.gz = 516.00
[Sun Jun  2 11:09:16 2013] Got source and background scale factors 1110328.000000, 4872102.000000
[Sun Jun  2 11:09:16 2013] User source parameters:
  Position = (361.2, 99.9) = 11 4 2.91 37 59 48.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 165.4 +/- 17.8
  Background aperture counts = 117.6
  Rate = 0.004 +/- 0.0004

[Sun Jun  2 11:09:16 2013] Updating counts from extracted products
[Sun Jun  2 11:09:16 2013] Set source signif. to 165.41/10.84 = 15.25
[Sun Jun  2 11:09:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:34 2013] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51.arf
[Sun Jun  2 11:09:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:34 2013] Updating source flux to 1.2e-13
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete