[Wed May 29 08:59:42 2013] Detection parameters:
  Position = (329.3, 201.6) = 11 4 14.63 38 7 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.2 +/- 14.0
  Background counts = 40.2
  Rate = 0.004 +/- 0.0006

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 7.37'
[Wed May 29 22:41:18 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 29 22:41:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.658
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 10.11"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src22.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src22.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu May 30 02:06:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Source 40 is offset by 7.518485 and 6.278064 pixels which is larger than
2 X fitted extent = 1.232161 x 2.964851, not incorporating fit results
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 05:28:44 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:44 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Fri May 31 05:28:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.658
[Fri May 31 05:28:44 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 10.11"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src22.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src22.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src22.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.670426 pixels away
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(28598.326233, 17490.161560, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (292, 164) - (367, 239)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(28598.326233, 17490.161560, 1087.500000, 2175.000000, X, Y) && !ellipse(30537.332200, 16226.356400, 2085.184060, 367.902411, 57.194300, X, Y) && !ellipse(29400.336243, 17931.297333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30323.178800, 16556.601600, 2051.552059, 359.498410, 56.202600, X, Y) && !ellipse(30037.138800, 16996.575000, 2026.328058, 369.493611, 56.034900, X, Y) && !ellipse(31524.713820, 14693.177800, 2269.792065, 412.548012, 57.219800, X, Y) && !ellipse(31411.907800, 14864.596200, 2295.600066, 462.531213, 57.120100, X, Y) && !ellipse(30829.074700, 15776.580600, 1780.112051, 372.940811, 55.791800, X, Y) && !ellipse(32194.096400, 13666.015800, 1937.352056, 391.835211, 55.648900, X, Y) && !ellipse(27111.281494, 14483.543991, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40.gif
[Sun Jun  2 09:01:51 2013] Mean detx,y = (-1050.92, 7005.09) 
[Sun Jun  2 09:01:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:02:16 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:02:17 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jun  2 09:02:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Jun  2 10:52:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 10:52:30 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:16 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:16 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 301.00
[Sun Jun  2 11:09:16 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 552.00
[Sun Jun  2 11:09:16 2013] Got source and background scale factors 776774.000000, 2449498.000000
[Sun Jun  2 11:09:16 2013] User source parameters:
  Position = (329.3, 201.6) = 11 4 14.63 38 7 14.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 126.0 +/- 18.4
  Background aperture counts = 175.0
  Rate = 0.003 +/- 0.0004

[Sun Jun  2 11:09:16 2013] Updating counts from extracted products
[Sun Jun  2 11:09:16 2013] Set source signif. to 125.95/13.23 = 9.52
[Sun Jun  2 11:09:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:34 2013] Using photon index=1.80, rate=0.00268, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40.arf
[Sun Jun  2 11:09:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:34 2013] Updating source flux to 4.7e-14
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete