[Wed May 29 08:59:42 2013] Detection parameters:
  Position = (338.5, 206.7) = 11 4 11.23 38 7 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.9 +/- 20.6
  Background counts = 40.2
  Rate = 0.01 +/- 0.0008

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 7.26'
[Wed May 29 22:41:18 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Wed May 29 22:41:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.632
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.06"
[Thu May 30 02:06:49 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 30 02:06:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src4.csv
[Thu May 30 02:06:49 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 30 02:06:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src4.csv
[Thu May 30 02:06:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 30 02:06:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Spatial fit model total counts = 974.813000, observed total counts = 880.000000
[Thu May 30 02:07:27 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:27 2013] Source is confused with source 41
[Fri May 31 05:28:44 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:44 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri May 31 05:28:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.632
[Fri May 31 05:28:44 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.06"
[Fri May 31 15:18:19 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src4.ximg exists
[Fri May 31 15:18:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src4.csv
[Fri May 31 15:18:19 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May 31 15:18:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src4.csv
[Fri May 31 15:18:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Spatial fit model total counts = 974.258000, observed total counts = 880.000000
[Fri May 31 15:18:56 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 15:18:56 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 30.704165 pixels away
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:08 2013] XMMSAS src. selection expression = ellipse(29400.336243, 17931.297333, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:08 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39_src.reg
[Sun Jun  2 08:09:08 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (301, 169) - (376, 244)
[Sun Jun  2 08:09:08 2013] XMMSAS bgd. selection expression = annulus(29400.336243, 17931.297333, 1087.500000, 2175.000000, X, Y) && !ellipse(30537.332200, 16226.356400, 2085.184060, 367.902411, 57.194300, X, Y) && !ellipse(30323.178800, 16556.601600, 2051.552059, 359.498410, 56.202600, X, Y) && !ellipse(30037.138800, 16996.575000, 2026.328058, 369.493611, 56.034900, X, Y) && !ellipse(31524.713820, 14693.177800, 2269.792065, 412.548012, 57.219800, X, Y) && !ellipse(31411.907800, 14864.596200, 2295.600066, 462.531213, 57.120100, X, Y) && !ellipse(30829.074700, 15776.580600, 1780.112051, 372.940811, 55.791800, X, Y) && !ellipse(28598.326233, 17490.161560, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:08 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39.gif
[Sun Jun  2 08:37:30 2013] Mean detx,y = (-191.62, 7106.36) 
[Sun Jun  2 08:37:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 08:37:51 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 08:37:52 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jun  2 08:37:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jun  2 09:56:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 09:56:32 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:04 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:05 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 665.00
[Sun Jun  2 11:09:05 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39_bgd.pi.gz = 426.00
[Sun Jun  2 11:09:05 2013] Got source and background scale factors 908392.000000, 1593100.000000
[Sun Jun  2 11:09:05 2013] User source parameters:
  Position = (338.5, 206.7) = 11 4 11.23 38 7 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 422.1 +/- 26.8
  Background aperture counts = 242.9
  Rate = 0.009 +/- 0.0006

[Sun Jun  2 11:09:05 2013] Updating counts from extracted products
[Sun Jun  2 11:09:05 2013] Set source signif. to 422.09/15.59 = 27.08
[Sun Jun  2 11:09:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:32 2013] Using photon index=1.80, rate=0.00899, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39.arf
[Sun Jun  2 11:09:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:32 2013] Updating source flux to 1.6e-13
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete