[Wed May 29 08:59:41 2013] Detection parameters:
  Position = (481.5, 318.9) = 11 3 18.39 38 15 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.6 +/- 13.7
  Background counts = 17.5
  Rate = 0.002 +/- 0.0003

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 13.35'
[Wed May 29 22:41:18 2013] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 13.11"
[Wed May 29 22:41:18 2013] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.912
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 13.11"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src37.ximg exists
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May 30 02:06:50 2013] Fit fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src37 appears to have run properly
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Spatial fit model total counts = 300.960000, observed total counts = 273.000000
[Thu May 30 02:07:27 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 05:28:45 2013] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:45 2013] Initial guess for spatial extent in simple fitting = 13.11"
[Fri May 31 05:28:45 2013] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.912
[Fri May 31 05:28:45 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 13.11"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src36.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src36.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src36_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src36.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src36.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src36.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Spatial fit model total counts = 307.267000, observed total counts = 273.000000
[Fri May 31 15:18:56 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(41840.797272, 27696.803070, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (444, 281) - (519, 356)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(41840.797272, 27696.803070, 1087.500000, 2175.000000, X, Y) && !ellipse(39341.880000, 28372.632800, 1484.656043, 563.855216, 335.335999, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31.gif
[Sun Jun  2 09:15:49 2013] Mean detx,y = (15468.91, 5420.56) 
[Sun Jun  2 09:15:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:16:15 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:16:16 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jun  2 09:16:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Jun  2 10:57:01 2013] Not generating rmf since there are only 99 counts
[Sun Jun  2 10:57:01 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:23 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:23 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 192.00
[Sun Jun  2 11:09:24 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 374.00
[Sun Jun  2 11:09:24 2013] Got source and background scale factors 1048808.000000, 3622285.000000
[Sun Jun  2 11:09:24 2013] User source parameters:
  Position = (481.5, 318.9) = 11 3 18.39 38 15 42.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 83.7 +/- 14.9
  Background aperture counts = 108.3
  Rate = 0.002 +/- 0.0003

[Sun Jun  2 11:09:24 2013] Updating counts from extracted products
[Sun Jun  2 11:09:24 2013] Set source signif. to 83.71/10.41 = 8.04
[Sun Jun  2 11:09:35 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:35 2013] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31.arf
[Sun Jun  2 11:09:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:36 2013] Updating source flux to 7.4e-14
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete