[Wed May 29 08:59:41 2013] Detection parameters:
  Position = (227.6, 327.4) = 11 4 52.17 38 16 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.8 +/- 14.2
  Background counts = 61.5
  Rate = 0.003 +/- 0.0005

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 5.55'
[Wed May 29 22:41:18 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Wed May 29 22:41:18 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.804
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 9.20"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src32.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src32.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src32.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Spatial fit model total counts = 1074.500000, observed total counts = 716.000000
[Thu May 30 02:07:27 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 02:07:27 2013] Source 30 is offset by -2.346887 and 7.839842 pixels which is larger than
2 X fitted extent = 1.122382 x 1.122382, not incorporating fit results
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:27 2013] Source is confused with source 28
[Fri May 31 05:28:44 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:44 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Fri May 31 05:28:44 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.804
[Fri May 31 05:28:44 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 9.20"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src31.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src31.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src31.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Spatial fit model total counts = 1072.350000, observed total counts = 716.000000
[Fri May 31 15:18:56 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 15:18:56 2013] Spatial fit model total counts = 1007.890000, observed total counts = 663.000000
[Fri May 31 15:18:56 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(19751.862869, 28438.780212, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (190, 290) - (265, 365)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(19751.862869, 28438.780212, 1087.500000, 2175.000000, X, Y) && !ellipse(20478.074448, 30765.836395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21153.837200, 30553.586200, 1696.360049, 297.052009, 58.390900, X, Y) && !ellipse(21677.830414, 29764.006226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20199.150345, 28660.931824, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30.gif
[Sun Jun  2 09:10:46 2013] Mean detx,y = (-2599.11, -7224.43) 
[Sun Jun  2 09:10:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:11:17 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:11:18 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun  2 09:11:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jun  2 10:55:11 2013] Not generating rmf since there are only 78 counts
[Sun Jun  2 10:55:11 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:20 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:20 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 497.00
[Sun Jun  2 11:09:21 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1278.00
[Sun Jun  2 11:09:21 2013] Got source and background scale factors 965020.000000, 4041205.000000
[Sun Jun  2 11:09:21 2013] User source parameters:
  Position = (227.6, 327.4) = 11 4 52.17 38 16 14.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 191.8 +/- 23.3
  Background aperture counts = 305.2
  Rate = 0.004 +/- 0.0005

[Sun Jun  2 11:09:21 2013] Updating counts from extracted products
[Sun Jun  2 11:09:21 2013] Set source signif. to 191.82/17.47 = 10.98
[Sun Jun  2 11:09:35 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:35 2013] Using photon index=1.80, rate=0.00409, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30.arf
[Sun Jun  2 11:09:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:35 2013] Updating source flux to 6.3e-14
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete