[Wed May 29 08:59:41 2013] Detection parameters:
  Position = (232.7, 330.0) = 11 4 50.27 38 16 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.4 +/- 13.3
  Background counts = 62.7
  Rate = 0.003 +/- 0.0004

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 5.28'
[Wed May 29 22:41:18 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Wed May 29 22:41:18 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.823
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 9.07"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src29.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src29.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src29.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Warning, spatial fit 29 centroid is now closest to src. 30
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:27 2013] Source is confused with source 30
[Fri May 31 05:28:44 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:44 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Fri May 31 05:28:44 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.823
[Fri May 31 05:28:44 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 9.07"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src28.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src28.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src28.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Warning, spatial fit 28 centroid is now closest to src. 30
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(20199.150345, 28660.931824, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (195, 292) - (270, 367)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(20199.150345, 28660.931824, 1087.500000, 2175.000000, X, Y) && !ellipse(20478.074448, 30765.836395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21153.837200, 30553.586200, 1696.360049, 297.052009, 58.390900, X, Y) && !ellipse(21677.830414, 29764.006226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19751.862869, 28438.780212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20504.689789, 31609.166626, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28.gif
[Sun Jun  2 09:07:51 2013] Mean detx,y = (-2145.37, -7188.72) 
[Sun Jun  2 09:07:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:08:15 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:08:16 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Jun  2 09:08:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Jun  2 10:54:30 2013] Not generating rmf since there are only 85 counts
[Sun Jun  2 10:54:30 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:19 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:19 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 480.00
[Sun Jun  2 11:09:19 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1035.00
[Sun Jun  2 11:09:19 2013] Got source and background scale factors 901856.000000, 2993217.000000
[Sun Jun  2 11:09:19 2013] User source parameters:
  Position = (232.7, 330.0) = 11 4 50.27 38 16 28.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 168.2 +/- 22.9
  Background aperture counts = 311.8
  Rate = 0.004 +/- 0.0005

[Sun Jun  2 11:09:19 2013] Updating counts from extracted products
[Sun Jun  2 11:09:19 2013] Set source signif. to 168.15/17.66 = 9.52
[Sun Jun  2 11:09:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:34 2013] Using photon index=1.80, rate=0.00358, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28.arf
[Sun Jun  2 11:09:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:35 2013] Updating source flux to 5.6e-14
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete