[Wed May 29 08:59:41 2013] Detection parameters:
  Position = (249.7, 342.7) = 11 4 44.00 38 17 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 14.0
  Background counts = 65.2
  Rate = 0.003 +/- 0.0004

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 4.77'
[Wed May 29 22:41:18 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Wed May 29 22:41:18 2013] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.862
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.81"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src28.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src28.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src28.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Warning, spatial fit 28 centroid is now closest to src. 24
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:27 2013] Source is confused with source 25
[Fri May 31 05:28:44 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:44 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Fri May 31 05:28:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.862
[Fri May 31 05:28:44 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.81"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src27.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src27.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src27.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Warning, spatial fit 27 centroid is now closest to src. 24
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(21677.830414, 29764.006226, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (212, 305) - (287, 380)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(21677.830414, 29764.006226, 1087.500000, 2175.000000, X, Y) && !ellipse(20478.074448, 30765.836395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21153.837200, 30553.586200, 1696.360049, 297.052009, 58.390900, X, Y) && !ellipse(20199.150345, 28660.931824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19751.862869, 28438.780212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20504.689789, 31609.166626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19908.618454, 32577.254028, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27.gif
[Sun Jun  2 09:06:50 2013] Mean detx,y = (-332.78, -7271.19) 
[Sun Jun  2 09:06:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:07:15 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:07:16 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun  2 09:07:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun  2 10:54:01 2013] Not generating rmf since there are only 87 counts
[Sun Jun  2 10:54:01 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:18 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:18 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 482.00
[Sun Jun  2 11:09:18 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 790.00
[Sun Jun  2 11:09:18 2013] Got source and background scale factors 874822.000000, 2107212.000000
[Sun Jun  2 11:09:18 2013] User source parameters:
  Position = (249.7, 342.7) = 11 4 44.00 38 17 27.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 154.0 +/- 23.0
  Background aperture counts = 328.0
  Rate = 0.003 +/- 0.0005

[Sun Jun  2 11:09:18 2013] Updating counts from extracted products
[Sun Jun  2 11:09:18 2013] Set source signif. to 154.03/18.11 = 8.51
[Sun Jun  2 11:09:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:34 2013] Using photon index=1.80, rate=0.00328, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27.arf
[Sun Jun  2 11:09:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:34 2013] Updating source flux to 8.6e-14
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete