[Wed May 29 08:59:41 2013] Detection parameters:
  Position = (236.2, 363.9) = 11 4 48.99 38 18 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.7 +/- 12.5
  Background counts = 49.8
  Rate = 0.002 +/- 0.0004

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 6.55'
[Wed May 29 22:41:18 2013] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 9.70"
[Wed May 29 22:41:18 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.838
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 9.70"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src34.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src34.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src34.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src34.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src34.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Warning, spatial fit 34 centroid is now closest to src. 24
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 05:28:45 2013] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:45 2013] Initial guess for spatial extent in simple fitting = 9.70"
[Fri May 31 05:28:45 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.838
[Fri May 31 05:28:45 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 9.70"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src33.ximg exists
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri May 31 15:18:20 2013] Fit fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src33 appears to have run properly
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Source 23 is offset by 2.790021 and -3.631533 pixels which is larger than
2 X fitted extent = 1.856731 x 8.920736, not incorporating fit results
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 15:18:56 2013] Source is confused with source 25
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(20504.689789, 31609.166626, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (199, 326) - (274, 401)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(20504.689789, 31609.166626, 1087.500000, 2175.000000, X, Y) && !ellipse(20478.074448, 30765.836395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21153.837200, 30553.586200, 1696.360049, 297.052009, 58.390900, X, Y) && !ellipse(21677.830414, 29764.006226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20199.150345, 28660.931824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19908.618454, 32577.254028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18212.339000, 35154.494000, 1837.784053, 229.723207, 56.283400, X, Y) && !ellipse(18695.751953, 34484.812927, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23.gif
[Sun Jun  2 09:12:59 2013] Mean detx,y = (-320.78, -9327.97) 
[Sun Jun  2 09:13:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:13:27 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:13:28 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jun  2 09:13:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jun  2 10:55:52 2013] Not generating rmf since there are only 67 counts
[Sun Jun  2 10:55:52 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:21 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:22 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 450.00
[Sun Jun  2 11:09:22 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1626.00
[Sun Jun  2 11:09:22 2013] Got source and background scale factors 1140358.000000, 6877511.000000
[Sun Jun  2 11:09:22 2013] User source parameters:
  Position = (236.2, 363.9) = 11 4 48.99 38 18 59.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 180.4 +/- 22.2
  Background aperture counts = 269.6
  Rate = 0.004 +/- 0.0005

[Sun Jun  2 11:09:22 2013] Updating counts from extracted products
[Sun Jun  2 11:09:22 2013] Set source signif. to 180.39/16.42 = 10.99
[Sun Jun  2 11:09:35 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:35 2013] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23.arf
[Sun Jun  2 11:09:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:35 2013] Updating source flux to 1.6e-13
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete