[Wed May 29 08:59:39 2013] Detection parameters:
  Position = (398.8, 114.1) = 11 3 49.04 38 0 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.9 +/- 18.5
  Background counts = 18.8
  Rate = 0.004 +/- 0.0004

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 15.22'
[Wed May 29 22:41:18 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Wed May 29 22:41:18 2013] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.864
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 14.04"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src23.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src23.csv
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May 30 02:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src23.csv
[Thu May 30 02:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 30 02:06:51 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May 30 02:06:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 30 02:06:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Spatial fit model total counts = 1161.670000, observed total counts = 1084.000000
[Thu May 30 02:07:27 2013] Offset between fit and detection position for source 2 = 1.717253 pixels
[Thu May 30 02:07:27 2013] Warning, changing simple spatial fit ID from 23 to 11
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.717253 pixels
  Position = (399.3, 112.5) = 11 3 48.86 38 0 43.5
  Extent = 23.0 (21.4-27.5)" x 16.5 (15.3-19.1)", rotation angle = 111 (97-123) degrees
  Source counts = 680.2 +/- 26.1
  Background counts = 0.0
  Rate = 0.01 +/- 0.0006
 Deleting source due to low signal-to-noise ratio