[Wed May 29 08:59:41 2013] Detection parameters:
  Position = (215.5, 396.9) = 11 4 56.69 38 21 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.8 +/- 12.7
  Background counts = 34.7
  Rate = 0.002 +/- 0.0003

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 9.34'
[Wed May 29 22:41:18 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Wed May 29 22:41:18 2013] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.832
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 11.10"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src42.ximg exists
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src42_1.ximg exists
[Thu May 30 02:06:50 2013] Fit fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src42 appears to have run properly
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Source 19 is offset by 2.838137 and -3.523805 pixels which is larger than
2 X fitted extent = 10.204552 x 1.275568, not incorporating fit results
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:27 2013] Source is confused with source 17
[Fri May 31 05:28:45 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:45 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Fri May 31 05:28:45 2013] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.832
[Fri May 31 05:28:45 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 11.10"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src41.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src41.csv
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri May 31 15:18:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src41.csv
[Fri May 31 15:18:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.176728 pixels away
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:09 2013] XMMSAS src. selection expression = ellipse(18695.751953, 34484.812927, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun  2 08:09:09 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (178, 359) - (253, 434)
[Sun Jun  2 08:09:09 2013] XMMSAS bgd. selection expression = annulus(18695.751953, 34484.812927, 1087.500000, 2175.000000, X, Y) && !ellipse(20504.689789, 31609.166626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19908.618454, 32577.254028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18212.339000, 35154.494000, 1837.784053, 229.723207, 56.283400, X, Y) && !ellipse(17515.798523, 36227.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16867.184158, 37219.126709, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:09 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19.gif
[Sun Jun  2 09:22:06 2013] Mean detx,y = (-263.70, -12740.93) 
[Sun Jun  2 09:22:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:22:33 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:22:34 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun  2 09:22:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun  2 11:02:45 2013] Not generating rmf since there are only 81 counts
[Sun Jun  2 11:02:45 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:26 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:26 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 366.00
[Sun Jun  2 11:09:26 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1323.00
[Sun Jun  2 11:09:26 2013] Got source and background scale factors 1145010.000000, 8219953.000000
[Sun Jun  2 11:09:26 2013] User source parameters:
  Position = (215.5, 396.9) = 11 4 56.69 38 21 22.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 181.7 +/- 20.2
  Background aperture counts = 184.3
  Rate = 0.004 +/- 0.0004

[Sun Jun  2 11:09:26 2013] Updating counts from extracted products
[Sun Jun  2 11:09:26 2013] Set source signif. to 181.71/13.58 = 13.39
[Sun Jun  2 11:09:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:36 2013] Using photon index=1.80, rate=0.00387, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19.arf
[Sun Jun  2 11:09:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:36 2013] Getting flux using calc_pl_flux failed
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete