[Wed May 29 08:59:40 2013] Detection parameters:
  Position = (201.9, 417.0) = 11 5 1.72 38 22 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 10.4
  Background counts = 25.0
  Rate = 0.0009 +/- 0.0002

[Wed May 29 08:59:43 2013] Off-axis axis estimate = 11.08'
[Wed May 29 22:41:18 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:41:18 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Wed May 29 22:41:18 2013] source mask rpix=2.8, npix_max = 42, mask sum = 32, frac = 0.757
[Wed May 29 22:41:18 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 11.97"
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src50.ximg exists
[Thu May 30 02:06:50 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu May 30 02:06:50 2013] Fit fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_src50 appears to have run properly
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu May 30 02:06:52 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu May 30 02:06:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu May 30 02:06:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:27 2013] Source 16 is offset by -4.245074 and 6.616249 pixels which is larger than
2 X fitted extent = 11.007265 x 1.375908, not incorporating fit results
[Thu May 30 02:07:27 2013] Source 16 is offset by 2.630236 and -3.481314 pixels which is larger than
2 X fitted extent = 1.432359 x 1.432359, not incorporating fit results
[Thu May 30 02:07:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:27 2013] Assessing source extent using major
[Thu May 30 02:07:27 2013] Source does appear to be extended
[Thu May 30 02:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 02:07:27 2013] Source is confused with source 17
[Fri May 31 05:28:45 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri May 31 05:28:45 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Fri May 31 05:28:45 2013] source mask rpix=2.8, npix_max = 42, mask sum = 32, frac = 0.757
[Fri May 31 05:28:45 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 11.97"
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src49.ximg exists
[Fri May 31 15:18:20 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri May 31 15:18:20 2013] Fit fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_src49 appears to have run properly
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri May 31 15:18:21 2013] fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri May 31 15:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri May 31 15:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:56 2013] Source 16 is offset by -4.190155 and 6.502640 pixels which is larger than
2 X fitted extent = 11.007265 x 1.375908, not incorporating fit results
[Fri May 31 15:18:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:56 2013] Assessing source extent using major
[Fri May 31 15:18:56 2013] Source does appear to be extended
[Fri May 31 15:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:09:10 2013] XMMSAS src. selection expression = ellipse(17515.798523, 36227.839661, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:09:10 2013] Writing source region out to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16_src.reg
[Sun Jun  2 08:09:10 2013] Extracting stamp from image fullrun_mos2_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (164, 379) - (239, 454)
[Sun Jun  2 08:09:10 2013] XMMSAS bgd. selection expression = annulus(17515.798523, 36227.839661, 1087.500000, 2175.000000, X, Y) && !ellipse(18212.339000, 35154.494000, 1837.784053, 229.723207, 56.283400, X, Y) && !ellipse(18605.502197, 38431.551147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18695.751953, 34484.812927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14984.151800, 34662.653800, 1029.680030, 245.540807, 347.383789, X, Y) && !ellipse(16867.184158, 37219.126709, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 08:09:10 2013] Writing fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16.gif
[Sun Jun  2 09:28:49 2013] Mean detx,y = (-318.00, -14825.80) 
[Sun Jun  2 09:28:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 09:29:12 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 09:29:13 2013] Setting source spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jun  2 09:29:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Jun  2 11:04:45 2013] Not generating rmf since there are only 44 counts
[Sun Jun  2 11:04:45 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:09:30 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:09:30 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 234.00
[Sun Jun  2 11:09:30 2013] Total counts from fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16_bgd.pi.gz = 904.00
[Sun Jun  2 11:09:31 2013] Got source and background scale factors 1056370.000000, 6658950.000000
[Sun Jun  2 11:09:31 2013] User source parameters:
  Position = (201.9, 417.0) = 11 5 1.72 38 22 47.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 90.6 +/- 16.3
  Background aperture counts = 143.4
  Rate = 0.002 +/- 0.0003

[Sun Jun  2 11:09:31 2013] Updating counts from extracted products
[Sun Jun  2 11:09:31 2013] Set source signif. to 90.59/11.98 = 7.56
[Sun Jun  2 11:09:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:37 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16.arf
[Sun Jun  2 11:09:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:37 2013] Getting flux using calc_pl_flux failed
[Sun Jun  2 11:10:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:28 2013] xmm0099280301/analysis//spectral/fullrun_mos2_xmm0099280301_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete