[Wed May 29 08:59:06 2013] Detection parameters:
  Position = (401.0, 113.5) = 11 3 48.23 38 0 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.8 +/- 12.2
  Background counts = 22.0
  Rate = 0.001 +/- 0.0003

[Wed May 29 08:59:07 2013] Off-axis axis estimate = 15.33'
[Wed May 29 12:56:44 2013] Using EEF radius (= 14.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:56:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 14.10"
[Wed May 29 12:56:44 2013] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.947
[Wed May 29 12:56:44 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 14.10"
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src45.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src45.csv
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src45.csv
[Wed May 29 22:41:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:41:18 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed May 29 22:41:18 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed May 29 22:41:18 2013] Fit fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu May 30 02:07:12 2013] Spatial fit model total counts = 398.634000, observed total counts = 442.000000
[Thu May 30 02:07:12 2013] Offset between fit and detection position for source 52 = 0.803994 pixels
[Thu May 30 02:07:12 2013] 385.811800 total counts/ 356.967000 bgd. counts: snr = 1.526699
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.803994 pixels
  Position = (400.8, 112.7) = 11 3 48.33 38 0 44.5
  Extent = 3.5 (3.5-4.7)", rotation angle = 0
  Source counts = 28.8 +/- 19.6
  Background counts = 357.0
  Rate = 0.0006 +/- 0.0004
  Deleting source due to low Poisson probability