[Wed May 29 08:59:06 2013] Detection parameters:
  Position = (183.1, 121.6) = 11 5 8.46 38 1 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.6 +/- 8.0
  Background counts = 5.5
  Rate = 0.0007 +/- 0.0002

[Wed May 29 08:59:07 2013] Off-axis axis estimate = 15.31'
[Wed May 29 12:56:44 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Wed May 29 12:56:44 2013] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.949
[Wed May 29 12:56:44 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 14.08"
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src54.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src54.csv
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src54_1.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src54.csv
[Wed May 29 22:41:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:41:18 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Wed May 29 22:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src54.csv
[Wed May 29 22:41:18 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Wed May 29 22:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src54.csv
[Wed May 29 22:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:06:56 2013] Warning, spatial fit 6 centroid is now closest to src. 4
[Thu May 30 02:07:12 2013] Spatial fit model total counts = 171.331000, observed total counts = 183.000000
[Thu May 30 02:07:12 2013] Offset between fit and detection position for source 50 = 1.749383 pixels
[Thu May 30 02:07:12 2013] Warning, changing simple spatial fit ID from 54 to 53
[Thu May 30 02:07:12 2013] 188.723100 total counts/ 134.850000 bgd. counts: snr = 4.639236
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.749383 pixels
  Position = (181.4, 121.9) = 11 5 9.09 38 1 24.2
  Extent = 28.3 (14.1-56.6)" x 8.6 (6.1-12.0)", rotation angle = 31 (18-42) degrees
  Source counts = 53.9 +/- 13.7
  Background counts = 134.8
  Rate = 0.001 +/- 0.0003
[Thu May 30 02:07:12 2013] Warning, spatial fit 54 centroid is now closest to src. 53
[Thu May 30 02:07:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:12 2013] Assessing source extent using major axis lower bound
[Thu May 30 02:07:12 2013] Source does appear to be extended
[Thu May 30 02:07:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Thu May 30 02:07:12 2013] Deleting source due to low Poisson probability 0.9