[Wed May 29 08:59:05 2013] Detection parameters:
  Position = (339.0, 206.9) = 11 4 11.04 38 7 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 385.6 +/- 26.7
  Background counts = 53.0
  Rate = 0.01 +/- 0.0008

[Wed May 29 08:59:07 2013] Off-axis axis estimate = 7.26'
[Wed May 29 12:56:44 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:56:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Wed May 29 12:56:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Wed May 29 12:56:44 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.06"
[Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 29 22:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src3.csv
[Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 29 22:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src3.csv
[Wed May 29 22:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 29 22:41:17 2013] Fit fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 30 02:07:11 2013] Spatial fit model total counts = 1397.890000, observed total counts = 1324.000000
[Thu May 30 02:07:11 2013] Offset between fit and detection position for source 34 = 1.389832 pixels
[Thu May 30 02:07:11 2013] 1285.698000 total counts/ 623.552000 bgd. counts: snr = 26.516575
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.389832 pixels
  Position = (337.8, 207.6) = 11 4 11.49 38 7 37.4
  Extent = 12.9 (10.8-15.9)", rotation angle = 0
  Source counts = 662.1 +/- 35.9
  Background counts = 623.6
  Rate = 0.01 +/- 0.0008
[Thu May 30 02:07:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:12 2013] Assessing source extent using major axis lower bound
[Thu May 30 02:07:12 2013] Source does appear to be extended
[Thu May 30 02:07:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 00:09:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 00:09:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 00:09:35 2013] Initial guess for spatial extent in simple fitting = 12.92"
[Fri May 31 00:09:35 2013] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.996
[Fri May 31 00:09:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.92"
[Fri May 31 05:28:42 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 31 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src3.csv
[Fri May 31 05:28:42 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 31 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src3.csv
[Fri May 31 05:28:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 31 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:40 2013] Warning, spatial fit 3 centroid is now closest to src. 39
[Fri May 31 15:18:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:40 2013] Assessing source extent using major axis lower bound
[Fri May 31 15:18:40 2013] Source does appear to be extended
[Fri May 31 15:18:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 15:18:40 2013] Source is confused with source 35
[Sat Jun  1 10:03:41 2013] XMMSAS src. selection expression = ellipse(29339.680800, 18010.157400, 775.368022, 775.368022, 0.000000, X, Y)
[Sat Jun  1 10:03:41 2013] Writing source region out to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34_src.reg
[Sat Jun  1 10:03:41 2013] Extracting stamp from image fullrun_mos1_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (293, 163) - (382, 252)
[Sat Jun  1 10:03:41 2013] XMMSAS bgd. selection expression = annulus(29339.680800, 18010.157400, 1292.280037, 2584.560074, X, Y) && !ellipse(26008.419495, 24101.503113, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(31439.384060, 14983.670800, 1843.832053, 441.206413, 56.255100, X, Y) && !ellipse(30523.138200, 16273.273200, 2217.624064, 411.899212, 53.916500, X, Y) && !ellipse(30054.072488, 16954.556800, 2033.760059, 370.456811, 54.867100, X, Y) && !ellipse(30671.809000, 16075.838000, 1773.880051, 418.992812, 53.402000, X, Y) && !ellipse(28499.837921, 17630.574112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31883.885800, 14300.312000, 1907.712055, 423.580812, 236.124000, X, Y) && !ellipse(32128.930760, 13910.766200, 2384.632069, 443.866413, 58.330600, X, Y)
[Sat Jun  1 10:03:41 2013] Writing fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34.gif
[Sat Jun  1 10:30:33 2013] Mean detx,y = (7208.02, 101.79) 
[Sat Jun  1 10:30:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 10:31:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 10:31:15 2013] Setting source spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jun  1 10:31:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Jun  2 11:08:28 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:08:28 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1226.00
[Sun Jun  2 11:08:28 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1176.00
[Sun Jun  2 11:08:28 2013] Got source and background scale factors 1554026.000000, 4162258.000000
[Sun Jun  2 11:08:28 2013] User source parameters:
  Position = (337.8, 207.6) = 11 4 11.49 38 7 37.4
  Extent = 12.9 (10.8-15.9)", rotation angle = 0
  Source aperture counts = 786.9 +/- 36.0
  Background aperture counts = 439.1
  Rate = 0.02 +/- 0.0008

[Sun Jun  2 11:08:56 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:08:56 2013] Using photon index=1.80, rate=0.0141, arf fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34.arf
[Sun Jun  2 11:08:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:08:56 2013] Updating source flux to 1.9e-13
[Sun Jun  2 11:09:39 2013] Flag c found in src. 34 procflags, skipping spectral fitting
[Sun Jun  2 11:10:10 2013] xmm0099280301/analysis//spectral/fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete