[Wed May 29 08:59:05 2013] Detection parameters:
  Position = (328.1, 203.2) = 11 4 15.05 38 7 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 18.3
  Background counts = 53.7
  Rate = 0.005 +/- 0.0006

[Wed May 29 08:59:07 2013] Off-axis axis estimate = 7.23'
[Wed May 29 12:56:44 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Wed May 29 12:56:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.760
[Wed May 29 12:56:44 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.04"
[Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src14.ximg exists
[Wed May 29 22:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src14.csv
[Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May 29 22:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src14.csv
[Wed May 29 22:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 29 22:41:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:11 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 13.538408 pixels away
[Thu May 30 02:07:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:12 2013] Assessing source extent using major
[Thu May 30 02:07:12 2013] Source does appear to be extended
[Thu May 30 02:07:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 00:09:35 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri May 31 00:09:35 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Fri May 31 00:09:35 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.760
[Fri May 31 00:09:35 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 10.04"
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src14.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src14.csv
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src14.csv
[Fri May 31 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 05:28:44 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May 31 05:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May 31 05:28:44 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May 31 05:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May 31 05:28:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:40 2013] Spatial fit model total counts = 1030.460000, observed total counts = 590.000000
[Fri May 31 15:18:40 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 15:18:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:40 2013] Assessing source extent using major
[Fri May 31 15:18:40 2013] Source does appear to be extended
[Fri May 31 15:18:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 10:03:41 2013] XMMSAS src. selection expression = ellipse(28499.837921, 17630.574112, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 10:03:41 2013] Writing source region out to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33_src.reg
[Sat Jun  1 10:03:41 2013] Extracting stamp from image fullrun_mos1_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (291, 166) - (366, 241)
[Sat Jun  1 10:03:41 2013] XMMSAS bgd. selection expression = annulus(28499.837921, 17630.574112, 1087.500000, 2175.000000, X, Y) && !ellipse(26008.419495, 24101.503113, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(29339.680800, 18010.157400, 1033.824030, 1033.824030, 0.000000, X, Y) && !ellipse(31439.384060, 14983.670800, 1843.832053, 441.206413, 56.255100, X, Y) && !ellipse(30523.138200, 16273.273200, 2217.624064, 411.899212, 53.916500, X, Y) && !ellipse(30054.072488, 16954.556800, 2033.760059, 370.456811, 54.867100, X, Y) && !ellipse(30671.809000, 16075.838000, 1773.880051, 418.992812, 53.402000, X, Y) && !ellipse(31883.885800, 14300.312000, 1907.712055, 423.580812, 236.124000, X, Y) && !ellipse(32128.930760, 13910.766200, 2384.632069, 443.866413, 58.330600, X, Y)
[Sat Jun  1 10:03:41 2013] Writing fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33.gif
[Sat Jun  1 10:46:27 2013] Mean detx,y = (7036.39, 925.12) 
[Sat Jun  1 10:46:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 10:47:13 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 10:47:14 2013] Setting source spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun  1 10:47:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun  2 06:51:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 06:51:17 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:08:35 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:08:35 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 460.00
[Sun Jun  2 11:08:35 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 970.00
[Sun Jun  2 11:08:35 2013] Got source and background scale factors 947968.000000, 3009275.000000
[Sun Jun  2 11:08:35 2013] User source parameters:
  Position = (328.1, 203.2) = 11 4 15.05 38 7 15.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 154.4 +/- 22.5
  Background aperture counts = 305.6
  Rate = 0.003 +/- 0.0005

[Sun Jun  2 11:08:35 2013] Updating counts from extracted products
[Sun Jun  2 11:08:35 2013] Set source signif. to 154.44/17.48 = 8.83
[Sun Jun  2 11:08:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:08:58 2013] Using photon index=1.80, rate=0.00329, arf fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33.arf
[Sun Jun  2 11:08:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:08:58 2013] Updating source flux to 5.3e-14
[Sun Jun  2 11:09:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:10 2013] xmm0099280301/analysis//spectral/fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete