[Wed May 29 08:59:03 2013] Detection parameters:
  Position = (484.4, 290.2) = 11 3 17.34 38 13 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.2 +/- 16.1
  Background counts = 18.3
  Rate = 0.003 +/- 0.0003

[Wed May 29 08:59:07 2013] Off-axis axis estimate = 13.50'
[Wed May 29 12:56:44 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Wed May 29 12:56:44 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Wed May 29 12:56:44 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 13.18"
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src30.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src30.csv
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src30.csv
[Wed May 29 22:41:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:41:18 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed May 29 22:41:18 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed May 29 22:41:18 2013] Fit fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu May 30 02:07:12 2013] Warning, spatial fit 30 centroid is now closest to src. 29
[Thu May 30 02:07:12 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.459863 pixels away
[Thu May 30 02:07:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:12 2013] Assessing source extent using major
[Thu May 30 02:07:12 2013] Source does appear to be extended
[Thu May 30 02:07:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 00:09:35 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Fri May 31 00:09:35 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Fri May 31 00:09:35 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Fri May 31 00:09:35 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 13.18"
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src30.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src30.csv
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src30.csv
[Fri May 31 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 05:28:44 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri May 31 05:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri May 31 05:28:44 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri May 31 05:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri May 31 05:28:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:40 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.126265 pixels away
[Fri May 31 15:18:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:40 2013] Assessing source extent using major
[Fri May 31 15:18:40 2013] Source does appear to be extended
[Fri May 31 15:18:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 10:03:42 2013] XMMSAS src. selection expression = ellipse(42095.103943, 25198.611664, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 10:03:42 2013] Writing source region out to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun  1 10:03:42 2013] Extracting stamp from image fullrun_mos1_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (447, 253) - (522, 328)
[Sat Jun  1 10:03:42 2013] XMMSAS bgd. selection expression = annulus(42095.103943, 25198.611664, 1087.500000, 2175.000000, X, Y) && !ellipse(41845.451538, 27726.539398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40083.560822, 23531.109894, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 10:03:42 2013] Writing fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3.gif
[Sat Jun  1 11:20:48 2013] Mean detx,y = (7999.84, -14514.61) 
[Sat Jun  1 11:20:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 11:21:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 11:21:14 2013] Setting source spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun  1 11:21:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  2 07:43:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 07:43:23 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:08:45 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:08:45 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 228.00
[Sun Jun  2 11:08:46 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 599.00
[Sun Jun  2 11:08:46 2013] Got source and background scale factors 1333424.000000, 5952215.000000
[Sun Jun  2 11:08:46 2013] User source parameters:
  Position = (484.4, 290.2) = 11 3 17.34 38 13 38.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 93.8 +/- 16.1
  Background aperture counts = 134.2
  Rate = 0.002 +/- 0.0003

[Sun Jun  2 11:08:46 2013] Updating counts from extracted products
[Sun Jun  2 11:08:46 2013] Set source signif. to 93.81/11.58 = 8.10
[Sun Jun  2 11:09:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:09:00 2013] Using photon index=1.80, rate=0.002, arf fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3.arf
[Sun Jun  2 11:09:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:09:00 2013] Updating source flux to 6.9e-14
[Sun Jun  2 11:09:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:10 2013] xmm0099280301/analysis//spectral/fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete