[Wed May 29 08:59:03 2013] Detection parameters: Position = (294.4, 275.0) = 11 4 27.48 38 12 32.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2583345.0 +/- 1551.6 Background counts = 57.3 Rate = 6e+01 +/- 0.03 [Wed May 29 08:59:07 2013] Off-axis axis estimate = 1.72' [Wed May 29 12:56:44 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting [Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 7.29" [Wed May 29 12:56:44 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056 [Wed May 29 12:56:44 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29" [Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src1.ximg exists [Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 29 22:41:16 2013] Fit fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src1 appears to have run properly [Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 29 22:41:17 2013] Fit fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Thu May 30 02:07:11 2013] Spatial fit model total counts = 2852360.000000, observed total counts = 2869920.000000 [Thu May 30 02:07:11 2013] Offset between fit and detection position for source 2 = 0.304299 pixels [Thu May 30 02:07:11 2013] 2848600.000000 total counts/ 25600.000000 bgd. counts: snr = 17643.750000 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.304299 pixels Position = (294.6, 275.3) = 11 4 27.41 38 12 32.0 Extent = 12.2 (12.2-12.2)" x 11.9 (11.9-11.9)", rotation angle = 300 (299-300) degrees Source counts = 2823000.0 +/- 1687.8 Background counts = 25600.0 Rate = 6e+01 +/- 0.04 [Thu May 30 02:07:11 2013] Spatial fit model total counts = 2661800.000000, observed total counts = 2702495.000000 [Thu May 30 02:07:11 2013] Offset between fit and detection position for source 2 = 0.156000 pixels [Thu May 30 02:07:11 2013] Warning, changing simple spatial fit ID from 1 to 2 [Thu May 30 02:07:11 2013] 2557070.000000 total counts/ 25600.000000 bgd. counts: snr = 15821.687500 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.156000 pixels Position = (294.6, 275.1) = 11 4 27.41 38 12 31.3 Extent = 12.3 (12.3-12.3)" x 10.1 (10.1-10.1)", rotation angle = 356 (356-356) degrees Source counts = 2531470.0 +/- 1599.1 Background counts = 25600.0 Rate = 5e+01 +/- 0.03 [Thu May 30 02:07:12 2013] Vigneting correction estimate = 1.000000 [Thu May 30 02:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 02:07:12 2013] Assessing source extent using major axis lower bound [Thu May 30 02:07:12 2013] Source does appear to be extended [Thu May 30 02:07:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22 [Thu May 30 02:07:12 2013] Source is confused with source 1 [Fri May 31 00:09:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 31 00:09:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 31 00:09:35 2013] Initial guess for spatial extent in simple fitting = 11.20" [Fri May 31 00:09:35 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952 [Fri May 31 00:09:35 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.20" [Fri May 31 05:28:42 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src1.ximg exists [Fri May 31 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src1.csv [Fri May 31 05:28:42 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src1_1.ximg exists [Fri May 31 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src1.csv [Fri May 31 05:28:42 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src1.csv [Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src1.csv [Fri May 31 05:28:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 15:18:40 2013] Warning, spatial fit 1 centroid is now closest to src. 1 [Fri May 31 15:18:40 2013] Spatial fit model total counts = 2664760.000000, observed total counts = 2702495.000000 [Fri May 31 15:18:40 2013] Offset between fit and detection position for source 2 = 0.066427 pixels [Fri May 31 15:18:40 2013] Warning, changing simple spatial fit ID from 1 to 2 [Fri May 31 15:18:40 2013] 2434940.000000 total counts/ 25600.000000 bgd. counts: snr = 15058.375000 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.066427 pixels Position = (294.6, 275.1) = 11 4 27.41 38 12 31.0 Extent = 11.5 (11.5-11.5)" x 9.5 (9.5-9.5)", rotation angle = 353 (353-353) degrees Source counts = 2409340.0 +/- 1560.4 Background counts = 25600.0 Rate = 5e+01 +/- 0.03 [Fri May 31 15:18:40 2013] Vigneting correction estimate = 1.000000 [Fri May 31 15:18:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 15:18:40 2013] Assessing source extent using major axis lower bound [Fri May 31 15:18:40 2013] Source does appear to be extended [Fri May 31 15:18:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21 [Sat Jun 1 10:03:40 2013] Counts = 2409340.000000, rescaling region sizes by 3.000000 [Sat Jun 1 10:03:40 2013] XMMSAS src. selection expression = ellipse(25583.836000, 23881.512000, 2075.058060, 1706.556649, 353.110540, X, Y) [Sat Jun 1 10:03:40 2013] Writing source region out to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2_src.reg [Sat Jun 1 10:03:40 2013] Extracting stamp from image fullrun_mos1_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (175, 156) - (414, 394) [Sat Jun 1 10:03:40 2013] XMMSAS bgd. selection expression = annulus(25583.836000, 23881.512000, 10375.290299, 20750.580597, X, Y) && !ellipse(26008.419495, 24101.503113, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(29339.680800, 18010.157400, 1033.824030, 1033.824030, 0.000000, X, Y) && !ellipse(31439.384060, 14983.670800, 1843.832053, 441.206413, 56.255100, X, Y) && !ellipse(20449.456800, 30721.789600, 700.540020, 461.829613, 344.951600, X, Y) && !ellipse(30523.138200, 16273.273200, 2217.624064, 411.899212, 53.916500, X, Y) && !ellipse(30054.072488, 16954.556800, 2033.760059, 370.456811, 54.867100, X, Y) && !ellipse(30671.809000, 16075.838000, 1773.880051, 418.992812, 53.402000, X, Y) && !ellipse(27739.923401, 33849.597168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19445.537400, 33303.151000, 2173.688063, 491.664814, 237.507000, X, Y) && !ellipse(20680.462000, 30849.796000, 2484.248071, 1382.816040, 29.830500, X, Y) && !ellipse(20547.623200, 31463.987000, 2002.976058, 721.375221, 64.362600, X, Y) && !ellipse(34708.844200, 33689.359600, 740.055221, 334.232810, 35.527603, X, Y) && !ellipse(28499.837921, 17630.574112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18471.264600, 34783.335340, 2280.168066, 526.518415, 54.987500, X, Y) && !ellipse(32957.348400, 12614.220600, 2028.824058, 464.490413, 55.149800, X, Y) && !ellipse(33415.447200, 11916.480600, 2609.632075, 517.298415, 56.726400, X, Y) && !ellipse(18498.173800, 34743.844600, 1777.032051, 498.936814, 55.385200, X, Y) && !ellipse(21623.578873, 29645.727325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20794.775635, 13799.433212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33185.243606, 12268.472800, 2530.904073, 486.956014, 55.909200, X, Y) && !ellipse(20076.432000, 32349.288000, 3046.824088, 3046.824088, 0.000000, X, Y) && !ellipse(31883.885800, 14300.312000, 1907.712055, 423.580812, 236.124000, X, Y) && !ellipse(12730.607200, 25721.825200, 530.100815, 350.345610, 90.932382, X, Y) && !ellipse(31450.250800, 8674.005200, 931.784027, 328.441609, 333.905263, X, Y) && !ellipse(22129.717728, 29912.589630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33923.016693, 11186.032120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32757.430000, 12913.320000, 1987.280057, 480.383214, 55.671500, X, Y) && !ellipse(32128.930760, 13910.766200, 2384.632069, 443.866413, 58.330600, X, Y) && !ellipse(42095.103943, 25198.611664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18352.818200, 34960.238000, 2369.200068, 520.646415, 55.412700, X, Y) && !ellipse(35883.561592, 36983.005200, 674.337619, 252.743207, 45.373317, X, Y) && !ellipse(27129.545441, 14520.732986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19468.878000, 33449.396000, 1725.536050, 1321.584038, 232.149000, X, Y) && !ellipse(34250.497800, 10647.578000, 2213.968064, 479.083214, 55.007600, X, Y) && !ellipse(41845.451538, 27726.539398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.310303, 38912.700867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17072.007721, 21521.427948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16834.674000, 36719.450000, 1921.432055, 1921.432055, 0.000000, X, Y) && !ellipse(40083.560822, 23531.109894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18510.199921, 38412.748230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40832.395905, 20567.955154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12547.815231, 22103.695786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16465.013600, 37733.257400, 2004.368058, 2004.368058, 0.000000, X, Y) && !ellipse(26348.863000, 9350.554600, 1128.360032, 552.652816, 12.092616, X, Y) [Sat Jun 1 10:03:40 2013] Writing fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2.gif [Sat Jun 1 10:06:50 2013] Mean detx,y = (88.73, 13.25) [Sat Jun 1 10:07:13 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 10:20:31 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 10:20:32 2013] Setting source spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat Jun 1 10:20:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sun Jun 2 11:08:27 2013] Updating aperture counts using extracted products [Sun Jun 2 11:08:27 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 3210371.00 [Sun Jun 2 11:08:27 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 59022.00 [Sun Jun 2 11:08:27 2013] Got source and background scale factors 4523301.000000, 457584164.000000 [Sun Jun 2 11:08:27 2013] User source parameters: Position = (294.6, 275.1) = 11 4 27.41 38 12 31.0 Extent = 11.5 (11.5-11.5)" x 9.5 (9.5-9.5)", rotation angle = 353 (353-353) degrees Source aperture counts = 3209787.6 +/- 1792.8 Background aperture counts = 583.4 Rate = 7e+01 +/- 0.04 [Sun Jun 2 11:08:56 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 11:08:56 2013] Using photon index=1.80, rate=51.4, arf fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2.arf [Sun Jun 2 11:08:56 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 11:08:56 2013] Updating source flux to 4.7e-10 [Sun Jun 2 11:09:39 2013] Flag c found in src. 2 procflags, skipping spectral fitting [Sun Jun 2 11:10:10 2013] xmm0099280301/analysis//spectral/fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete