[Wed May 29 08:59:04 2013] Detection parameters:
  Position = (319.4, 389.6) = 11 4 18.24 38 20 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.9 +/- 15.7
  Background counts = 32.4
  Rate = 0.006 +/- 0.0007

[Wed May 29 08:59:07 2013] Off-axis axis estimate = 6.78'
[Wed May 29 12:56:44 2013] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:56:44 2013] Initial guess for spatial extent in simple fitting = 9.82"
[Wed May 29 12:56:44 2013] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.789
[Wed May 29 12:56:44 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.82"
[Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 29 22:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src9.csv
[Wed May 29 22:41:16 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 29 22:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src9.csv
[Wed May 29 22:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 29 22:41:17 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 29 22:41:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 29 22:41:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 02:07:11 2013] Warning, spatial fit 9 centroid is now closest to src. 13
[Thu May 30 02:07:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 02:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 02:07:12 2013] Assessing source extent using major
[Thu May 30 02:07:12 2013] Source does appear to be extended
[Thu May 30 02:07:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 00:09:35 2013] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Fri May 31 00:09:35 2013] Initial guess for spatial extent in simple fitting = 9.82"
[Fri May 31 00:09:35 2013] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.789
[Fri May 31 00:09:35 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.82"
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src9.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src9.csv
[Fri May 31 05:28:43 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri May 31 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src9.csv
[Fri May 31 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 05:28:44 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri May 31 05:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 31 05:28:44 2013] fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri May 31 05:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 31 05:28:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 15:18:40 2013] Spatial fit model total counts = 419.958000, observed total counts = 360.000000
[Fri May 31 15:18:40 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 15:18:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 15:18:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 15:18:40 2013] Assessing source extent using major
[Fri May 31 15:18:40 2013] Source does appear to be extended
[Fri May 31 15:18:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 10:03:41 2013] XMMSAS src. selection expression = ellipse(27739.923401, 33849.597168, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 10:03:41 2013] Writing source region out to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  1 10:03:41 2013] Extracting stamp from image fullrun_mos1_xmm0099280301_pi300-10000_cl_sm2.00.img.gz, (282, 352) - (357, 427)
[Sat Jun  1 10:03:41 2013] XMMSAS bgd. selection expression = annulus(27739.923401, 33849.597168, 1087.500000, 2175.000000, X, Y)
[Sat Jun  1 10:03:41 2013] Writing fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17.gif
[Sat Jun  1 10:39:14 2013] Mean detx,y = (-7020.63, -7270.45) 
[Sat Jun  1 10:39:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 10:39:55 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 10:39:56 2013] Setting source spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  1 10:39:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun  2 06:31:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 06:31:21 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:08:32 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:08:32 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 280.00
[Sun Jun  2 11:08:32 2013] Total counts from fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1510.00
[Sun Jun  2 11:08:32 2013] Got source and background scale factors 1128024.000000, 8843100.000000
[Sun Jun  2 11:08:32 2013] User source parameters:
  Position = (319.4, 389.6) = 11 4 18.24 38 20 49.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 87.4 +/- 17.8
  Background aperture counts = 192.6
  Rate = 0.002 +/- 0.0004

[Sun Jun  2 11:08:32 2013] Updating counts from extracted products
[Sun Jun  2 11:08:32 2013] Set source signif. to 87.38/13.88 = 6.30
[Sun Jun  2 11:08:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:08:57 2013] Using photon index=1.80, rate=0.00186, arf fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17.arf
[Sun Jun  2 11:08:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:08:57 2013] Updating source flux to 3.6e-14
[Sun Jun  2 11:09:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:10:10 2013] xmm0099280301/analysis//spectral/fullrun_mos1_xmm0099280301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete