[Tue May 29 19:49:43 2012] Detection parameters:
  Position = (270.2, 309.0) = 11 4 37.34 38 15 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3231.7 +/- 75.8
  Background counts = 226.7
  Rate = 0.2 +/- 0.004

[Tue May 29 19:49:43 2012] Off-axis axis estimate = 2.19'
[Tue May 29 20:03:46 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue May 29 20:03:46 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue May 29 20:03:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Tue May 29 20:03:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.52"
[Tue May 29 20:32:51 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 20:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 20:32:51 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 20:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 20:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 20:32:51 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 20:32:51 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 20:32:51 2012] Fit fullrun_pn_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 22:49:43 2012] Spatial fit model total counts = 8757.630000, observed total counts = 9191.000000
[Tue May 29 22:49:43 2012] Offset between fit and detection position for source 1 = 1.660426 pixels
[Tue May 29 22:49:43 2012] 8646.210000 total counts/ 5442.260000 bgd. counts: snr = 43.430626
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.660426 pixels
  Position = (269.1, 310.2) = 11 4 37.76 38 15 5.0
  Extent = 9.1 (8.8-9.6)", rotation angle = 0
  Source counts = 3203.9 +/- 93.0
  Background counts = 5442.3
  Rate = 0.09 +/- 0.003
[Tue May 29 22:49:43 2012] Vigneting correction estimate = 1.000000
[Tue May 29 22:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 22:49:43 2012] Assessing source extent using major axis lower bound
[Tue May 29 22:49:43 2012] Source does appear to be extended
[Tue May 29 22:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 22:50:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 22:50:00 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Tue May 29 22:50:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.111
[Tue May 29 22:50:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.13"
[Wed May 30 00:01:00 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 00:01:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 00:01:00 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 00:01:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 00:01:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:01:00 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 00:01:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 30 00:01:00 2012] fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 00:01:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 30 00:01:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 01:36:46 2012] Spatial fit model total counts = 7911.770000, observed total counts = 8931.000000
[Wed May 30 01:36:46 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 01:36:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 01:36:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 01:36:46 2012] Assessing source extent using major axis lower bound
[Wed May 30 01:36:46 2012] Source does appear to be extended
[Wed May 30 01:36:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 01:36:53 2012] Counts = 3203.950000, rescaling region sizes by 2.000000
[Wed May 30 01:36:53 2012] XMMSAS src. selection expression = ellipse(23359.927200, 26939.602340, 1095.469232, 1095.469232, 0.000000, X, Y)
[Wed May 30 01:36:53 2012] Writing source region out to fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 01:36:53 2012] Extracting stamp from image fullrun_pn_xmm0099280201_pi300-10000_cl_sm2.00.img.gz, (206, 247) - (332, 373)
[Wed May 30 01:36:53 2012] XMMSAS bgd. selection expression = annulus(23359.927200, 26939.602340, 3651.564105, 7303.128210, X, Y) && !ellipse(24048.192780, 26051.595581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.864075, 23153.737305, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25790.886000, 23825.178000, 2224.418464, 1976.983257, 27.029000, X, Y)
[Wed May 30 01:36:53 2012] Writing fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1.gif
[Wed May 30 01:41:09 2012] Mean detx,y = (330.93, 3457.36) 
[Wed May 30 01:41:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 01:42:10 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 01:42:10 2012] Setting source spectrum file to fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 01:42:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 09:41:48 2012] Updating aperture counts using extracted products
[Wed May 30 09:41:48 2012] Error reading totcts from fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 09:41:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:41:48 2012] Using photon index=1.80, rate=0.0927, arf fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 09:41:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:41:48 2012] Updating source flux to 4.4e-13
[Wed May 30 09:43:17 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed May 30 09:43:29 2012] Reading fit data from xmm0099280201/analysis//spectral/fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 30 09:43:29 2012] Spectral fit parameter nH value = 1.19125e+21
[Wed May 30 09:43:29 2012] Spectral fit parameter PhoIndex value = 3.11519
[Wed May 30 09:43:29 2012] Failed to get F(0.3-8.0) from xmm0099280201/analysis//spectral/fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 30 09:43:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:43:29 2012] Using Nh = 1.2e+21, photon index=3.12, rate=0.0927, arf fullrun_pn_xmm0099280201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 09:43:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:43:29 2012] Updating source flux to 3e-13