[Tue May 29 19:50:32 2012] Detection parameters:
  Position = (297.1, 275.0) = 11 4 27.40 38 12 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 976757.3 +/- 1162.6
  Background counts = 34.8
  Rate = 3e+01 +/- 0.04

[Tue May 29 19:50:33 2012] Off-axis axis estimate = 1.70'
[Tue May 29 21:20:42 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue May 29 21:20:42 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue May 29 21:20:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue May 29 21:20:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue May 29 22:49:41 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 22:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 22:49:41 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 22:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 22:49:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 22:49:42 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 22:49:42 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 22:49:42 2012] Fit fullrun_mos2_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 22:49:55 2012] Spatial fit model total counts = 877124.000000, observed total counts = 918329.000000
[Tue May 29 22:49:55 2012] Offset between fit and detection position for source 2 = 0.059177 pixels
[Tue May 29 22:49:55 2012] 863313.000000 total counts/ 25600.000000 bgd. counts: snr = 5235.706250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.059177 pixels
  Position = (297.1, 275.0) = 11 4 27.39 38 12 31.8
  Extent = 7.7 (7.7-7.7)", rotation angle = 0
  Source counts = 837713.0 +/- 929.1
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.03
[Tue May 29 22:49:55 2012] Vigneting correction estimate = 1.000000
[Tue May 29 22:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 22:49:55 2012] Assessing source extent using major axis lower bound
[Tue May 29 22:49:55 2012] Source does appear to be extended
[Tue May 29 22:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:12:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 00:12:14 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed May 30 00:12:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed May 30 00:12:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.68"
[Wed May 30 01:36:44 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 01:36:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 01:36:44 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 01:36:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 01:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 01:36:45 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 01:36:45 2012] fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 01:36:45 2012] Fit fullrun_mos2_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 01:36:49 2012] Spatial fit model total counts = 897654.000000, observed total counts = 918329.000000
[Wed May 30 01:36:49 2012] Offset between fit and detection position for source 2 = 0.033229 pixels
[Wed May 30 01:36:49 2012] 886141.000000 total counts/ 25600.000000 bgd. counts: snr = 5378.381250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.033229 pixels
  Position = (297.2, 275.0) = 11 4 27.38 38 12 31.8
  Extent = 8.1 (8.1-8.2)", rotation angle = 0
  Source counts = 860541.0 +/- 941.4
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.03
[Wed May 30 01:36:49 2012] Vigneting correction estimate = 1.000000
[Wed May 30 01:36:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 01:36:49 2012] Assessing source extent using major axis lower bound
[Wed May 30 01:36:49 2012] Source does appear to be extended
[Wed May 30 01:36:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 08:55:23 2012] Counts = 860541.000000, rescaling region sizes by 3.000000
[Wed May 30 08:55:23 2012] XMMSAS src. selection expression = ellipse(25805.760900, 23875.927000, 1465.907442, 1465.907442, 0.000000, X, Y)
[Wed May 30 08:55:23 2012] Writing source region out to fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2_src.reg
[Wed May 30 08:55:23 2012] Extracting stamp from image fullrun_mos2_xmm0099280201_pi300-10000_cl_sm2.00.img.gz, (213, 191) - (381, 359)
[Wed May 30 08:55:23 2012] XMMSAS bgd. selection expression = annulus(25805.760900, 23875.927000, 7329.537211, 14659.074422, X, Y) && !ellipse(25088.688141, 23512.912323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12921.444229, 25696.926147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31568.539368, 8634.306694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34974.214478, 33627.270325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36161.992279, 36931.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34453.316000, 12805.298000, 2013.824058, 2013.824058, 0.000000, X, Y) && !ellipse(32868.357000, 14858.338000, 1924.216055, 351.347210, 233.190000, X, Y) && !ellipse(31871.304000, 16102.952000, 1941.736056, 1941.736056, 0.000000, X, Y) && !ellipse(35534.336000, 11395.726000, 4027.648116, 4027.648116, 0.000000, X, Y) && !ellipse(34068.870000, 13513.846000, 3856.888111, 3856.888111, 0.000000, X, Y) && !ellipse(33305.290000, 14038.112000, 2592.872075, 2454.728071, 90.000000, X, Y)
[Wed May 30 08:55:23 2012] Writing fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2.gif
[Wed May 30 08:56:00 2012] Mean detx,y = (-129.82, -86.67) 
[Wed May 30 08:56:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 08:59:02 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 08:59:02 2012] Setting source spectrum file to fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 08:59:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 30 09:41:49 2012] Updating aperture counts using extracted products
[Wed May 30 09:41:49 2012] Error reading totcts from fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 09:41:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:41:49 2012] Using photon index=1.80, rate=24.7, arf fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 09:41:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:41:49 2012] Updating source flux to 2.5e-10
[Wed May 30 09:43:17 2012] Reading fit data from xmm0099280201/analysis//spectral/fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2_pl.csv
[Wed May 30 09:43:17 2012] Spectral fit parameter nH value = 2.15941e+20
[Wed May 30 09:43:17 2012] Spectral fit parameter PhoIndex value = 2.4115
[Wed May 30 09:43:17 2012] Failed to get F(0.3-8.0) from xmm0099280201/analysis//spectral/fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed May 30 09:43:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:43:17 2012] Using Nh = 2.2e+20, photon index=2.41, rate=24.7, arf fullrun_mos2_xmm0099280201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 09:43:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:43:17 2012] Updating source flux to 2.1e-10