[Tue May 29 19:50:07 2012] Detection parameters:
  Position = (315.2, 167.0) = 11 4 20.72 38 4 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.3 +/- 10.1
  Background counts = 20.5
  Rate = 0.002 +/- 0.0005

[Tue May 29 19:50:07 2012] Off-axis axis estimate = 9.61'
[Tue May 29 20:32:51 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Tue May 29 20:32:51 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Tue May 29 20:32:51 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Tue May 29 20:32:51 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.23"
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src19.ximg exists
[Tue May 29 21:20:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src19.csv
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue May 29 21:20:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src19.csv
[Tue May 29 21:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue May 29 21:20:41 2012] Fit fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue May 29 22:49:49 2012] Spatial fit model total counts = 247.323000, observed total counts = 247.000000
[Tue May 29 22:49:49 2012] Offset between fit and detection position for source 25 = 0.090892 pixels
[Tue May 29 22:49:49 2012] 248.611100 total counts/ 223.987000 bgd. counts: snr = 1.645315
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.090892 pixels
  Position = (315.3, 166.9) = 11 4 20.71 38 4 41.7
  Extent = 3.4 (2.8-5.4)", rotation angle = 0
  Source counts = 24.6 +/- 15.8
  Background counts = 224.0
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability