[Tue May 29 19:50:06 2012] Detection parameters:
  Position = (297.2, 275.0) = 11 4 27.38 38 12 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1008435.4 +/- 1202.4
  Background counts = 31.1
  Rate = 3e+01 +/- 0.04

[Tue May 29 19:50:07 2012] Off-axis axis estimate = 1.70'
[Tue May 29 20:32:51 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue May 29 20:32:51 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue May 29 20:32:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue May 29 20:32:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 21:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 21:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 21:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 21:20:41 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 21:20:41 2012] Fit fullrun_mos1_xmm0099280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 22:49:49 2012] Spatial fit model total counts = 898163.000000, observed total counts = 939259.000000
[Tue May 29 22:49:49 2012] Offset between fit and detection position for source 1 = 0.082116 pixels
[Tue May 29 22:49:49 2012] 897845.000000 total counts/ 25600.000000 bgd. counts: snr = 5451.531250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.082116 pixels
  Position = (297.2, 274.9) = 11 4 27.37 38 12 31.3
  Extent = 8.7 (8.7-8.7)", rotation angle = 0
  Source counts = 872245.0 +/- 947.5
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.03
[Tue May 29 22:49:49 2012] Vigneting correction estimate = 1.000000
[Tue May 29 22:49:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 22:49:49 2012] Assessing source extent using major axis lower bound
[Tue May 29 22:49:49 2012] Source does appear to be extended
[Tue May 29 22:49:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 00:01:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 00:01:00 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Wed May 30 00:01:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.994
[Wed May 30 00:01:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.73"
[Wed May 30 00:12:14 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 00:12:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 00:12:14 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 00:12:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 00:12:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 00:12:14 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 00:12:14 2012] fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 00:12:14 2012] Fit fullrun_mos1_xmm0099280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 01:36:47 2012] Spatial fit model total counts = 898593.000000, observed total counts = 939656.000000
[Wed May 30 01:36:47 2012] Offset between fit and detection position for source 1 = 0.010436 pixels
[Wed May 30 01:36:47 2012] 897943.000000 total counts/ 25600.000000 bgd. counts: snr = 5452.143750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010436 pixels
  Position = (297.2, 274.9) = 11 4 27.37 38 12 31.4
  Extent = 8.7 (8.7-8.7)", rotation angle = 0
  Source counts = 872343.0 +/- 947.6
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.03
[Wed May 30 01:36:47 2012] Vigneting correction estimate = 1.000000
[Wed May 30 01:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 01:36:47 2012] Assessing source extent using major axis lower bound
[Wed May 30 01:36:47 2012] Source does appear to be extended
[Wed May 30 01:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 04:23:14 2012] Counts = 872343.000000, rescaling region sizes by 3.000000
[Wed May 30 04:23:14 2012] XMMSAS src. selection expression = ellipse(25806.622460, 23866.737320, 1572.462045, 1572.462045, 0.000000, X, Y)
[Wed May 30 04:23:14 2012] Writing source region out to fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 04:23:14 2012] Extracting stamp from image fullrun_mos1_xmm0099280201_pi300-10000_cl_sm2.00.img.gz, (207, 185) - (388, 365)
[Wed May 30 04:23:14 2012] XMMSAS bgd. selection expression = annulus(25806.622460, 23866.737320, 7862.310226, 15724.620452, X, Y) && !ellipse(20666.251020, 30654.768400, 432.350412, 432.350412, 0.000000, X, Y) && !ellipse(31543.017200, 8597.767620, 560.053616, 560.053616, 0.000000, X, Y) && !ellipse(34975.157013, 33643.835052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12939.031143, 25641.228943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42057.814056, 27776.897339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32318.676000, 15757.552000, 1354.034963, 1354.034963, 0.000000, X, Y)
[Wed May 30 04:23:14 2012] Writing fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1.gif
[Wed May 30 04:23:52 2012] Mean detx,y = (124.25, -9.97) 
[Wed May 30 04:23:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 04:27:15 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 04:27:15 2012] Setting source spectrum file to fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 04:27:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 09:41:48 2012] Updating aperture counts using extracted products
[Wed May 30 09:41:48 2012] Error reading totcts from fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 09:41:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:41:48 2012] Using photon index=1.80, rate=25, arf fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 09:41:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:41:48 2012] Updating source flux to 2.3e-10
[Wed May 30 09:42:22 2012] Reading fit data from xmm0099280201/analysis//spectral/fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 30 09:42:22 2012] Spectral fit parameter nH value = 1.54803e+20
[Wed May 30 09:42:22 2012] Spectral fit parameter PhoIndex value = 2.40228
[Wed May 30 09:42:22 2012] Failed to get F(0.3-8.0) from xmm0099280201/analysis//spectral/fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 30 09:42:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:42:22 2012] Using Nh = 1.5e+20, photon index=2.40, rate=25, arf fullrun_mos1_xmm0099280201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 09:42:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:42:22 2012] Updating source flux to 1.9e-10