[Tue Jun  5 13:11:21 2012] Detection parameters:
  Position = (369.3, 226.9) = 10 5 12.98 -70 20 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.5 +/- 17.8
  Background counts = 58.4
  Rate = 0.004 +/- 0.0006

[Tue Jun  5 13:11:22 2012] Off-axis axis estimate = 7.30'
[Tue Jun  5 13:30:02 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 13:30:02 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Tue Jun  5 13:30:02 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.134
[Tue Jun  5 13:30:02 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 10.08"
[Tue Jun  5 17:15:52 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass0_src66.ximg exists
[Tue Jun  5 17:15:52 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass0_src66_1.ximg exists
[Tue Jun  5 17:15:52 2012] Fit fullrun_pn_xmm0099020301_pi300-10000_cl_pass0_src66 appears to have run properly
[Tue Jun  5 17:15:53 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Tue Jun  5 17:15:53 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Tue Jun  5 17:15:53 2012] Fit fullrun_pn_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Tue Jun  5 20:33:48 2012] Source 68 is offset by 2.095630 and -2.796288 pixels which is larger than
2 X fitted extent = 9.266759 x 2.103766, not incorporating fit results
[Tue Jun  5 20:33:48 2012] Spatial fit model total counts = 914.340000, observed total counts = 915.000000
[Tue Jun  5 20:33:48 2012] Offset between fit and detection position for source 68 = 0.970401 pixels
[Tue Jun  5 20:33:48 2012] Warning, changing simple spatial fit ID from 66 to 67
[Tue Jun  5 20:33:48 2012] 894.848000 total counts/ 362.842000 bgd. counts: snr = 27.929152
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.970401 pixels
  Position = (370.1, 226.4) = 10 5 12.30 -70 20 54.6
  Extent = 20.8 (20.8-41.6)", rotation angle = 0
  Source counts = 532.0 +/- 29.9
  Background counts = 362.8
  Rate = 0.01 +/- 0.0006
[Tue Jun  5 20:33:48 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 20:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 20:33:48 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 20:33:48 2012] Source does appear to be extended
[Tue Jun  5 20:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 20:33:48 2012] Source is confused with source 66
[Tue Jun  5 20:34:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  5 20:34:42 2012] Initial guess for spatial extent in simple fitting = 20.80"
[Tue Jun  5 20:34:42 2012] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.986
[Tue Jun  5 20:34:42 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 20.80"
[Wed Jun  6 00:35:23 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_src65.ximg exists
[Wed Jun  6 00:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_src65.csv
[Wed Jun  6 00:35:23 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed Jun  6 00:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_src65.csv
[Wed Jun  6 00:35:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 00:35:25 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed Jun  6 00:35:25 2012] fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed Jun  6 00:35:25 2012] Fit fullrun_pn_xmm0099020301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Wed Jun  6 02:58:35 2012] Warning, spatial fit 65 centroid is now closest to src. 65
[Wed Jun  6 02:58:35 2012] Spatial fit model total counts = 923.190000, observed total counts = 915.000000
[Wed Jun  6 02:58:35 2012] Offset between fit and detection position for source 68 = 0.116221 pixels
[Wed Jun  6 02:58:35 2012] Warning, changing simple spatial fit ID from 65 to 66
[Wed Jun  6 02:58:35 2012] 914.373000 total counts/ 415.607000 bgd. counts: snr = 24.465574
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.116221 pixels
  Position = (370.1, 226.5) = 10 5 12.27 -70 20 54.1
  Extent = 20.8 (20.8-41.6)", rotation angle = 0
  Source counts = 498.8 +/- 30.2
  Background counts = 415.6
  Rate = 0.01 +/- 0.0006
[Wed Jun  6 02:58:35 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 02:58:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 02:58:35 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 02:58:35 2012] Source does appear to be extended
[Wed Jun  6 02:58:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 02:59:08 2012] XMMSAS src. selection expression = ellipse(32150.354000, 19654.428000, 1247.748036, 1247.748036, 0.000000, X, Y)
[Wed Jun  6 02:59:08 2012] Writing source region out to fullrun_pn_xmm0099020301_pi300-10000_pass1_cl_src68_src.reg
[Wed Jun  6 02:59:08 2012] Extracting stamp from image fullrun_pn_xmm0099020301_pi300-10000_cl_sm2.00.img.gz, (298, 155) - (442, 298)
[Wed Jun  6 02:59:08 2012] XMMSAS bgd. selection expression = annulus(32150.354000, 19654.428000, 2079.580060, 4159.160120, X, Y) && !ellipse(27723.376000, 24757.930000, 1203.192035, 386.033611, 49.416000, X, Y) && !ellipse(28042.368408, 24386.807251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.860000, 24162.598000, 2559.888074, 2559.888074, 0.000000, X, Y) && !ellipse(27714.731580, 23824.085200, 306.805609, 306.805609, 0.000000, X, Y) && !ellipse(28857.486000, 23446.024000, 1247.496036, 472.625614, 46.693000, X, Y) && !ellipse(33512.358002, 22855.250946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29098.332000, 23213.414000, 1280.304037, 1280.304037, 0.000000, X, Y) && !ellipse(29820.094000, 22271.498000, 1427.792041, 1427.792041, 0.000000, X, Y) && !ellipse(30468.906000, 21597.586000, 1495.288043, 1495.288043, 0.000000, X, Y) && !ellipse(34391.812000, 21643.576400, 443.995213, 443.995213, 0.000000, X, Y) && !ellipse(30917.003071, 21047.171934, 1579.216045, 382.241365, 53.277470, X, Y) && !ellipse(31148.960000, 20708.792000, 3327.328096, 3327.328096, 0.000000, X, Y) && !ellipse(31782.190000, 20107.142000, 1539.600044, 1539.600044, 0.000000, X, Y) && !ellipse(32567.621582, 19096.391891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29505.894897, 19036.811707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32890.961670, 18653.904709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33265.903080, 18344.749400, 424.856012, 424.856012, 0.000000, X, Y) && !ellipse(32342.714050, 18119.379608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34552.147125, 17727.199921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33895.332000, 17553.680400, 1821.992052, 1821.992052, 0.000000, X, Y) && !ellipse(32540.767051, 17699.598286, 516.943245, 287.974725, 342.554115, X, Y) && !ellipse(35040.430000, 16952.404000, 3501.760101, 2487.384072, 90.000000, X, Y) && !ellipse(30446.948792, 16699.388962, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  6 02:59:08 2012] Writing fullrun_pn_xmm0099020301_pi300-10000_pass1_cl_src68.gif
[Wed Jun  6 05:14:29 2012] Mean detx,y = (-400.14, 10296.30) 
[Wed Jun  6 05:14:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 05:15:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 05:15:22 2012] Setting source spectrum file to fullrun_pn_xmm0099020301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Wed Jun  6 05:15:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0099020301_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Wed Jun  6 11:06:22 2012] Updating aperture counts using extracted products
[Wed Jun  6 11:06:22 2012] Error reading totcts from fullrun_pn_xmm0099020301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Wed Jun  6 11:06:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 11:06:27 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0099020301_pi300-10000_pass1_cl_src68.arf
[Wed Jun  6 11:06:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 11:06:27 2012] Updating source flux to 8.7e-14
[Wed Jun  6 11:08:25 2012] Flag b found in src. 68 procflags, skipping spectral fitting
[Wed Jun  6 11:08:25 2012] Flag c found in src. 68 procflags, skipping spectral fitting