[Tue Jun  5 13:12:47 2012] Detection parameters:
  Position = (256.0, 199.9) = 10 6 50.70 -70 22 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.6 +/- 10.8
  Background counts = 17.9
  Rate = 0.002 +/- 0.0004

[Tue Jun  5 13:12:48 2012] Off-axis axis estimate = 7.78'
[Tue Jun  5 18:31:04 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 18:31:04 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Tue Jun  5 18:31:04 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.091
[Tue Jun  5 18:31:04 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.32"
[Tue Jun  5 20:33:19 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jun  5 20:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src17.csv
[Tue Jun  5 20:33:19 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jun  5 20:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src17.csv
[Tue Jun  5 20:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 20:33:20 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jun  5 20:33:20 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jun  5 20:33:20 2012] Fit fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Jun  5 20:34:12 2012] Spatial fit model total counts = 210.610000, observed total counts = 210.000000
[Tue Jun  5 20:34:12 2012] Offset between fit and detection position for source 47 = 0.072317 pixels
[Tue Jun  5 20:34:12 2012] 211.800300 total counts/ 192.246000 bgd. counts: snr = 1.410307
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.072317 pixels
  Position = (256.1, 200.0) = 10 6 50.67 -70 22 49.9
  Extent = 2.6 (2.6-5.3)", rotation angle = 0
  Source counts = 19.6 +/- 14.6
  Background counts = 192.2
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability