[Tue Jun  5 13:12:46 2012] Detection parameters:
  Position = (328.7, 425.3) = 10 5 48.31 -70 6 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 386.9 +/- 24.7
  Background counts = 20.6
  Rate = 0.01 +/- 0.0008

[Tue Jun  5 13:12:48 2012] Off-axis axis estimate = 9.46'
[Tue Jun  5 18:31:04 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 18:31:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 18:31:04 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Tue Jun  5 18:31:04 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Tue Jun  5 18:31:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.16"
[Tue Jun  5 20:33:19 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun  5 20:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src2.csv
[Tue Jun  5 20:33:19 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun  5 20:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src2.csv
[Tue Jun  5 20:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 20:33:19 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun  5 20:33:19 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun  5 20:33:19 2012] Fit fullrun_mos2_xmm0099020301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun  5 20:34:12 2012] Warning, spatial fit 2 centroid is now closest to src. 17
[Tue Jun  5 20:34:12 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.702821 pixels away
[Tue Jun  5 20:34:12 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 20:34:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 20:34:12 2012] Assessing source extent using major
[Tue Jun  5 20:34:12 2012] Source does appear to be extended
[Tue Jun  5 20:34:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 20:34:12 2012] Source is confused with source 17
[Wed Jun  6 01:31:37 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 01:31:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 01:31:37 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Wed Jun  6 01:31:37 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Wed Jun  6 01:31:37 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.16"
[Wed Jun  6 02:58:15 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun  6 02:58:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_src2.csv
[Wed Jun  6 02:58:15 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun  6 02:58:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_src2.csv
[Wed Jun  6 02:58:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 02:58:16 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun  6 02:58:16 2012] fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun  6 02:58:16 2012] Fit fullrun_mos2_xmm0099020301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun  6 02:58:49 2012] Spatial fit model total counts = 523.828000, observed total counts = 526.000000
[Wed Jun  6 02:58:49 2012] Offset between fit and detection position for source 3 = 0.307303 pixels
[Wed Jun  6 02:58:49 2012] 528.736000 total counts/ 275.828000 bgd. counts: snr = 15.228018
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.307303 pixels
  Position = (328.4, 425.4) = 10 5 48.56 -70 6 29.2
  Extent = 4.9 (4.1-5.6)", rotation angle = 0
  Source counts = 252.9 +/- 23.0
  Background counts = 275.8
  Rate = 0.005 +/- 0.0004
[Wed Jun  6 02:58:50 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 02:58:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 02:58:50 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 02:58:50 2012] Source does appear to be extended
[Wed Jun  6 02:58:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 10:06:39 2012] XMMSAS src. selection expression = ellipse(28519.564200, 36963.136200, 296.724009, 296.724009, 0.000000, X, Y)
[Wed Jun  6 10:06:39 2012] Writing source region out to fullrun_mos2_xmm0099020301_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun  6 10:06:39 2012] Extracting stamp from image fullrun_mos2_xmm0099020301_pi300-10000_cl_sm2.00.img.gz, (311, 408) - (345, 442)
[Wed Jun  6 10:06:39 2012] XMMSAS bgd. selection expression = annulus(28519.564200, 36963.136200, 494.540014, 989.080028, X, Y) && !ellipse(28722.236450, 37390.349548, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  6 10:06:39 2012] Writing fullrun_mos2_xmm0099020301_pi300-10000_pass1_cl_src3.gif
[Wed Jun  6 10:12:18 2012] Mean detx,y = (-7925.82, 5127.48) 
[Wed Jun  6 10:12:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 10:12:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 10:12:35 2012] Setting source spectrum file to fullrun_mos2_xmm0099020301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun  6 10:12:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099020301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun  6 11:06:34 2012] Updating aperture counts using extracted products
[Wed Jun  6 11:06:34 2012] Error reading totcts from fullrun_mos2_xmm0099020301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun  6 11:06:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 11:06:37 2012] Using photon index=1.80, rate=0.00478, arf fullrun_mos2_xmm0099020301_pi300-10000_pass1_cl_src3.arf
[Wed Jun  6 11:06:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 11:06:37 2012] Updating source flux to 1.2e-13
[Wed Jun  6 11:07:43 2012] Flag c found in src. 3 procflags, skipping spectral fitting