[Sat May 19 23:48:27 2012] Detection parameters:
  Position = (316.9, 314.1) = 3 35 28.59 -25 44 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.3 +/- 12.0
  Background counts = 8.6
  Rate = 0.005 +/- 0.0006

[Sat May 19 23:48:27 2012] Off-axis axis estimate = 1.76'
[Sun May 20 00:27:02 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:27:02 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun May 20 00:27:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun May 20 00:27:02 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.31"
[Sun May 20 00:50:33 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 20 00:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src10.csv
[Sun May 20 00:50:33 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 20 00:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src10.csv
[Sun May 20 00:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:50:34 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 20 00:50:34 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 20 00:50:34 2012] Fit fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun May 20 00:50:43 2012] Source 9 is offset by -5.813058 and -7.612923 pixels which is larger than
2 X fitted extent = 0.839835 x 0.839835, not incorporating fit results
[Sun May 20 00:50:43 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:50:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:50:43 2012] Assessing source extent using major
[Sun May 20 00:50:43 2012] Source does appear to be extended
[Sun May 20 00:50:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 01:32:03 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun May 20 01:32:03 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun May 20 01:32:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun May 20 01:32:03 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.31"
[Sun May 20 01:55:23 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 20 01:55:23 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 20 01:55:23 2012] Fit fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun May 20 01:55:23 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 20 01:55:23 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 20 01:55:23 2012] Fit fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun May 20 01:55:32 2012] Source 9 is offset by -5.813058 and -7.612923 pixels which is larger than
2 X fitted extent = 0.839835 x 0.839835, not incorporating fit results
[Sun May 20 01:55:32 2012] Vigneting correction estimate = 1.000000
[Sun May 20 01:55:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 01:55:32 2012] Assessing source extent using major
[Sun May 20 01:55:32 2012] Source does appear to be extended
[Sun May 20 01:55:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 02:27:05 2012] XMMSAS src. selection expression = ellipse(27522.287994, 27278.699677, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 02:27:05 2012] Writing source region out to fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src9_src.reg
[Sun May 20 02:27:05 2012] Extracting stamp from image fullrun_mos2_xmm0099010101_pi300-10000_cl_sm2.00.img.gz, (279, 277) - (354, 352)
[Sun May 20 02:27:05 2012] XMMSAS bgd. selection expression = annulus(27522.287994, 27278.699677, 1087.500000, 2175.000000, X, Y) && !ellipse(26311.104296, 26349.877200, 328.995209, 210.272006, 97.653518, X, Y)
[Sun May 20 02:27:05 2012] Writing fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src9.gif
[Sun May 20 02:30:00 2012] Mean detx,y = (534.39, 345.64) 
[Sun May 20 02:30:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 02:30:11 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 02:30:11 2012] Setting source spectrum file to fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May 20 02:30:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun May 20 02:36:46 2012] Not generating rmf since there are only 85 counts
[Sun May 20 02:36:46 2012] rmf not generated due to insufficient counts
[Sun May 20 02:38:04 2012] Updating aperture counts using extracted products
[Sun May 20 02:38:04 2012] Error reading totcts from fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May 20 02:38:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 02:38:04 2012] Using photon index=1.80, rate=0.00453, arf fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src9.arf
[Sun May 20 02:38:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 02:38:04 2012] Updating source flux to 4.3e-14
[Sun May 20 02:38:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting