[Sat May 19 23:48:26 2012] Detection parameters:
  Position = (424.3, 348.2) = 3 34 54.03 -25 41 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.3 +/- 21.2
  Background counts = 8.1
  Rate = 0.03 +/- 0.002

[Sat May 19 23:48:27 2012] Off-axis axis estimate = 9.81'
[Sun May 20 00:27:02 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:27:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 00:27:02 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Sun May 20 00:27:02 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Sun May 20 00:27:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.33"
[Sun May 20 00:50:33 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 20 00:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 00:50:33 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 20 00:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 00:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:50:34 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 20 00:50:34 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 20 00:50:34 2012] Fit fullrun_mos2_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 20 00:50:43 2012] Spatial fit model total counts = 408.172000, observed total counts = 407.000000
[Sun May 20 00:50:43 2012] Offset between fit and detection position for source 1 = 0.357270 pixels
[Sun May 20 00:50:43 2012] 407.220000 total counts/ 171.927000 bgd. counts: snr = 17.944731
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.357270 pixels
  Position = (424.0, 348.4) = 3 34 54.14 -25 41 54.9
  Extent = 6.4 (5.8-7.3)", rotation angle = 0
  Source counts = 235.3 +/- 20.2
  Background counts = 171.9
  Rate = 0.01 +/- 0.001
[Sun May 20 00:50:43 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:50:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:50:43 2012] Assessing source extent using major axis lower bound
[Sun May 20 00:50:43 2012] Source does appear to be extended
[Sun May 20 00:50:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 01:32:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 01:32:03 2012] Initial guess for spatial extent in simple fitting = 6.43"
[Sun May 20 01:32:03 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.022
[Sun May 20 01:32:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.43"
[Sun May 20 01:55:22 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 20 01:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 01:55:22 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 20 01:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 01:55:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 01:55:23 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 20 01:55:23 2012] fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 20 01:55:23 2012] Fit fullrun_mos2_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 20 01:55:32 2012] Spatial fit model total counts = 351.384000, observed total counts = 351.000000
[Sun May 20 01:55:32 2012] Offset between fit and detection position for source 1 = 0.027131 pixels
[Sun May 20 01:55:32 2012] 350.023000 total counts/ 125.035000 bgd. counts: snr = 20.120722
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.027131 pixels
  Position = (424.0, 348.4) = 3 34 54.13 -25 41 54.9
  Extent = 6.1 (5.5-7.0)", rotation angle = 0
  Source counts = 225.0 +/- 18.7
  Background counts = 125.0
  Rate = 0.01 +/- 0.001
[Sun May 20 01:55:32 2012] Vigneting correction estimate = 1.000000
[Sun May 20 01:55:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 01:55:32 2012] Assessing source extent using major axis lower bound
[Sun May 20 01:55:32 2012] Source does appear to be extended
[Sun May 20 01:55:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 02:27:05 2012] XMMSAS src. selection expression = ellipse(36839.568705, 30262.540000, 366.688811, 366.688811, 0.000000, X, Y)
[Sun May 20 02:27:05 2012] Writing source region out to fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1_src.reg
[Sun May 20 02:27:05 2012] Extracting stamp from image fullrun_mos2_xmm0099010101_pi300-10000_cl_sm2.00.img.gz, (403, 327) - (445, 369)
[Sun May 20 02:27:05 2012] XMMSAS bgd. selection expression = annulus(36839.568705, 30262.540000, 611.148018, 1222.296035, X, Y)
[Sun May 20 02:27:05 2012] Writing fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1.gif
[Sun May 20 02:27:07 2012] Mean detx,y = (-5841.01, 7784.65) 
[Sun May 20 02:27:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 02:27:16 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 02:27:16 2012] Setting source spectrum file to fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 20 02:27:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 20 02:38:04 2012] Updating aperture counts using extracted products
[Sun May 20 02:38:04 2012] Error reading totcts from fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 20 02:38:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 02:38:04 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1.arf
[Sun May 20 02:38:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 02:38:04 2012] Updating source flux to 2.5e-13
[Sun May 20 02:38:18 2012] Reading fit data from xmm0099010101/analysis//spectral/fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1_pl.csv
[Sun May 20 02:38:18 2012] Spectral fit parameter nH value = 3.00973e+20
[Sun May 20 02:38:18 2012] Spectral fit parameter PhoIndex value = 1.9904
[Sun May 20 02:38:18 2012] Failed to get F(0.3-8.0) from xmm0099010101/analysis//spectral/fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun May 20 02:38:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 02:38:18 2012] Using Nh = 3e+20, photon index=1.99, rate=0.0116, arf fullrun_mos2_xmm0099010101_pi300-10000_pass1_cl_src1.arf
[Sun May 20 02:38:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 02:38:18 2012] Updating source flux to 2.4e-13