[Sat May 19 23:48:06 2012] Detection parameters:
  Position = (317.3, 314.7) = 3 35 28.47 -25 44 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 10.6
  Background counts = 7.8
  Rate = 0.004 +/- 0.0006

[Sat May 19 23:48:06 2012] Off-axis axis estimate = 1.80'
[Sun May 20 00:05:58 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:05:58 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sun May 20 00:05:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Sun May 20 00:05:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.33"
[Sun May 20 00:27:01 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 20 00:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_src11.csv
[Sun May 20 00:27:01 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 20 00:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_src11.csv
[Sun May 20 00:27:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:27:02 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 20 00:27:02 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 20 00:27:02 2012] Fit fullrun_mos1_xmm0099010101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 20 00:50:40 2012] Spatial fit model total counts = 137.999000, observed total counts = 138.000000
[Sun May 20 00:50:40 2012] Offset between fit and detection position for source 10 = 0.259797 pixels
[Sun May 20 00:50:40 2012] 139.211200 total counts/ 96.963100 bgd. counts: snr = 4.290461
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.259797 pixels
  Position = (317.1, 314.6) = 3 35 28.55 -25 44 22.5
  Extent = 4.4 (3.3-6.0)", rotation angle = 0
  Source counts = 42.2 +/- 11.8
  Background counts = 97.0
  Rate = 0.002 +/- 0.0006
[Sun May 20 00:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 20 00:50:40 2012] Source does appear to be extended
[Sun May 20 00:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 01:08:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 01:08:38 2012] Initial guess for spatial extent in simple fitting = 4.42"
[Sun May 20 01:08:38 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.979
[Sun May 20 01:08:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.42"
[Sun May 20 01:32:03 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 20 01:32:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_src11.csv
[Sun May 20 01:32:03 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 20 01:32:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_src11.csv
[Sun May 20 01:32:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 01:32:03 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 20 01:32:03 2012] fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 20 01:32:03 2012] Fit fullrun_mos1_xmm0099010101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May 20 01:55:29 2012] Spatial fit model total counts = 138.000000, observed total counts = 138.000000
[Sun May 20 01:55:29 2012] Offset between fit and detection position for source 10 = 0.004385 pixels
[Sun May 20 01:55:29 2012] 139.212700 total counts/ 97.226700 bgd. counts: snr = 4.258060
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.004385 pixels
  Position = (317.1, 314.6) = 3 35 28.54 -25 44 22.5
  Extent = 4.4 (3.3-6.0)", rotation angle = 0
  Source counts = 42.0 +/- 11.8
  Background counts = 97.2
  Rate = 0.002 +/- 0.0006
[Sun May 20 01:55:29 2012] Vigneting correction estimate = 1.000000
[Sun May 20 01:55:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 01:55:29 2012] Assessing source extent using major axis lower bound
[Sun May 20 01:55:29 2012] Source does appear to be extended
[Sun May 20 01:55:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 02:17:18 2012] XMMSAS src. selection expression = ellipse(27535.590540, 27317.994200, 262.053008, 262.053008, 0.000000, X, Y)
[Sun May 20 02:17:18 2012] Writing source region out to fullrun_mos1_xmm0099010101_pi300-10000_pass1_cl_src10_src.reg
[Sun May 20 02:17:18 2012] Extracting stamp from image fullrun_mos1_xmm0099010101_pi300-10000_cl_sm2.00.img.gz, (302, 299) - (332, 330)
[Sun May 20 02:17:18 2012] XMMSAS bgd. selection expression = annulus(27535.590540, 27317.994200, 436.755013, 873.510025, X, Y)
[Sun May 20 02:17:18 2012] Writing fullrun_mos1_xmm0099010101_pi300-10000_pass1_cl_src10.gif
[Sun May 20 02:20:11 2012] Mean detx,y = (631.83, -711.87) 
[Sun May 20 02:20:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 02:20:18 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 02:20:18 2012] Setting source spectrum file to fullrun_mos1_xmm0099010101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 20 02:20:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0099010101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 20 02:26:24 2012] Not generating rmf since there are only 41 counts
[Sun May 20 02:26:24 2012] rmf not generated due to insufficient counts
[Sun May 20 02:38:03 2012] Updating aperture counts using extracted products
[Sun May 20 02:38:03 2012] Error reading totcts from fullrun_mos1_xmm0099010101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 20 02:38:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 02:38:03 2012] Using photon index=1.80, rate=0.00217, arf fullrun_mos1_xmm0099010101_pi300-10000_pass1_cl_src10.arf
[Sun May 20 02:38:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 02:38:03 2012] Updating source flux to 2.7e-14
[Sun May 20 02:38:05 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting